Program for Cable Box-Direct Entry Method

RCU600BL_IB.qxd 10/17/03 8:09 Page 8

Program for CABLE Box—Direct Entry Method

In order for the six-component universal remote to control your CABLE box, you must program

it with the code that matches your CABLE box. To program your remote to control your CABLE box, follow these steps:

1.Manually turn on the CABLE box.

2.Locate the enclosed CABLE box Code List. Find your brand in the CABLE box Codes.

Note: If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on Code Search on page 10).

3.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.

4.Press and release the CABLE key. The indicator light blinks and then remains lit.

5.Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off.

Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3.

6.Aim the remote at the CABLE box. Press the ON•OFF key.

If your CABLE box turns off, you have found the correct code.

7.Enter the code in the box provided on this page for future reference.

8.If your CABLE box does not turn off, repeat steps 3-6 above, entering the next code for your brand.

If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10).

CODE INDICATOR SEARCH LIGHT

CABLE (BLINK)

(OFF)

ON•OFF

CABLE BOX CODE

Program for AUDIO Systems—Direct Entry Method

This remote control will operate many features found in AUDIO systems.

To program your remote to control your audio component, follow these steps:

Note: CD systems need to be programmed using the DVD component key.

1.Manually turn on the AUDIO component you wish to control.

2.Locate the enclosed AUDIO system Code List. Find your brand in the AUDIO Codes.