Program for CABLE Box—Direct Entry Method
In order for the
it with the code that matches your CABLE box. To program your remote to control your CABLE box, follow these steps:
1.Manually turn on the CABLE box.
2.Locate the enclosed CABLE box Code List. Find your brand in the CABLE box Codes.
Note: If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on Code Search on page 11).
3.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.
4.Press and release the CABLE key. The indicator light blinks and then remains lit.
5.Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid
Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3.
6.Aim the remote at the CABLE box. Press the ON•OFF key.
If your CABLE box turns off, you have found the correct code.
7.Enter the code in the box provided on this page for future reference.
8.If your CABLE box does not turn off, repeat steps
If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 11).
CODE INDICATOR SEARCH LIGHT
CABLE (BLINK)
(OFF)
ON•OFF
CABLE BOX CODE
Program for AUDIO Systems—Direct Entry Method
This remote control will operate many features found in AUDIO systems.
To program your remote to control your audio component, follow these steps:
Note: CD systems need to be programmed using the DVD component key.
1.Manually turn on the AUDIO component you wish to control.
2.Locate the enclosed AUDIO system Code List. Find your brand in the AUDIO Codes.
Note: If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on Code Search on page 11).
3.Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key.
4.Press and release the AUDIO key. The indicator light blinks and then remains lit.
5.Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid
Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3.
CODE INDICATOR SEARCH LIGHT
AUDIO (BLINK)
(OFF)
8 | RCU800 |