AMX IS-SPX-1000/1300 manual Publishing, Using Quick Publish

Inspired Signage XPress Programming

FIG. 31 Transparent background as shown on the IS-SPX Player

Publishing

To publish a project manually to a device, do the following:

1.Open My Devices in a first tab. Identify the IS-SPX Player on which you want to publish. For more information, please refer to the Monitoring on page 26.

2.Open My Projects in a second tab.

3.Drag and drop the project you want to copy to the device you want to update.

The above procedure will copy the entire project into the targeted IS-SPX Player. All the modified files will be updated with the new version, all the new files will be added, and all the files already on the IS-SPX Player but no longer in the project will be deleted.

FIG. 32 Copying the project into the IS-SPX Player

The publishing might take some time, depending on the size of your project and the speed of the network. Once the project has been published, do not unplug the device without a proper shutdown, or part of the content might not be properly saved on the IS-SPX Player. For safe shutdown of the device, use the http configuration interface.

Using Quick Publish

Once a project has been published manually to the device, it can be published again using the Quick Publish button. The Quick Publish button is located on the address bar (FIG. 33) and is activated whenever a project is open.

FIG. 33 The Quick Publish button on the address bar

To use Quick Publish:

1.Open your project.

2.Press the Quick Publish button.

3.All modifications done on your project will be copied onto the IS-SPX Player.

Inspired XPress - Programming Guide 25