AG Neovo TSC-34/RU manual Interface type, Serial mode, USB mode

TSC-34/RU User’s Guide

4. Interface type

TSC -34/RU has serial and USB interface type. You choose either type. You cannot use both these at the same time.

(Notice) In the state that connected a serial and a USB cable to a computer, please do not start power on of TSC-34/RU and computer. Because it may cause malfunction.

4-1. Serial mode

In serial mode, please use CN5 for connecting to host computer, and CN6 for power supply.

Specifications

Transmission format: Asynchronous serial

Transfer rate:	9600bps
Data format:	8 bit
Stop bit:	1 bit
Parity:	None

4-2. USB mode

In USB mode, please use CN4 for connecting to host computer. When you input power supply from CN6, please connect also the Vbus line of the USB (CN4). Because TSC-34/RU recognizes that it was con- nected to the host computer with a Vbus line.

Specifications
Transmission spec:	USB Specification 2.0 Full Speed
Transfer mode:	Control transfer (Command) / Interrupt transfer (Coordinate)
Device class:	Vendor definition

Document No. DER-S0017A 6 Rev.1.1 ©2008 DMC Co., Ltd.