Sony BZNP-D1, NSP-1 manual Confirm firmware version of NSP1, Set Date and Time, Reboot NSP1

Page 7

Sony NSP-1 / BZNP-D1 Tutorials

Confirm firmware version of NSP1

Click “System Settings” Check the Software Version

If the Software Version is lower than 2.10, please update NSP1 referring to a release note at www.sony.com/nsp1,

Set Date and Time

1.Set Date and Time 7

2.Click Send

Set Display resolution and orientation

1. Set Display settings

Select resolution from VGA, WVGA, SVGA, XGA and composite 8. WVGA (848x480) is recommended to drive a plasma display because of square pixel ratio makes it easy to produce content.

Select Orientation from Landscape or Portrait 2. Click Send

Reboot NSP1

1.Click Reboot

2.Click Reboot

7Time Zone does matter only when NTP is utilized to adjust date and time automatically over network. Currently NSP1 doesn’t support “Daylight Saving Time”. Followings are for normal time. -5 (EST). -6 (CST), -8 (PST).

8There is no simultaneous video output on “Composite video signal” and “Analog RGB - VGA (HD15) signal”

-7 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Sony NSP-1 / BZNP-D1 Tutorials Contents Scope Update NSP-1 and BZNP-D1 when necessaryNSP-1 related products Microsoft Windows XP professional Equipment and Configuration# of NSP-1 11-20 21-60 61-110 111-160 161-210Cross over cable to connect PC and NSP1 directly 100BT router/switch/hub Nothing special Ethernet cableAny kind of display with VGA HD15 interface such as Plasma Launch Web browser and connect to NSP1 Setup of NSP-1Change Network settings of PC Confirm network connection with NSP1Set Date and Time Set Display resolution and orientationReboot NSP1 Confirm firmware version of NSP1Create a group Installation of BZNP-D1Setup of BZNP-D1 Register NSP1Ingest content Preparation Create a playlistCreate a new playlist Preview a playlist Assign a playlist as defaultTips Create a daily schedule SchedulingAssign a daily schedule to a specific day Flash Content Production guidelinesStill graphics VideoFAQ Launch Canopus ProCoder Express AppendixClick Mpeg then Click Next in a Select Generic Target window Click Convert in a Job Summary window Video file conversion with Discreet CleanerXL Sony NSP-1 / BZNP-D1 Tutorials
Top Page Image Contents