Valve Actuators, Remote Control, LOW-VOLTAGE Wiring

VALVE ACTUATORS

Mount Valve Actuators (model CVA-24) to three-port valves in accordance with instructions printed on box.

Run cables to low voltage compartment of LX-30 Power Center, and plug into circuit board at appropriate valve socket :

1.Intake (suction) Valve to INT VLV socket.

2.Return Valve to RET VLV socket.

3.Auxiliary Valve (optional) to AUX VLV socket.

Coil any excess cable, and carefully store inside low voltage compartment.

REMOTE CONTROL

Provide a standard single-gang electrical box for mounting the CP-30 Remote Control. If located outdoors, the electrical box must be raintight.

Strip jacket of 4-pair cable 6 to identify the twisted pairs and assure correct connections.

Strip insulation of each wire 318, and connect to switch pigtails using wire nuts in accordance with appropriate wiring diagram.

Pay attention to the two different wiring possibilities (for either a dual-thermostat or a single-thermostat heater). See Pages 6 and 8.

Insulate any unused wires from possible shorting.

Mount Remote Control to electrical box, using gasket and mounting screws provided.

LOW-VOLTAGE WIRING

All low voltage connections are made to circuit board which i s located behind the hinged faceplate i n left side compartment of the LX-30. Strip jacket of 4-pair cable 6 to identify the twisted pairs and assure correct connections. Strip insulation of each wire %", and connect to appropriate screw terminals in accordance with wiring diagram.

Pay attention to the two different wiring possibilities (for either a dual-thermostat or a single-thermostat heater). See Pages 6 and 8.

NOTE : For the convenience of the Pool Serviceperson, the screw terminal can be unplugged from the circuit board without disconnecting wires.

HEATER CONNECTIONS

The system is capable of activating :

1.a dual-thermostat gas heater with fireman's switch.(Page 6).

2.a dual-thermostat gas heater without fireman's switch.(Page 7 ) .

3.a single-thermostat gas heater. (Page 8).

4.an electric heater (rated up to 3KVA) or a heat pump. (See below).

ELECTRIC HEATER OR HEAT PUMP :

For systems which utilize a heat pump or electric heater, a Relay Kit (model RLY-LX) should be added at the LX-30 Power Center.

Install RLY-LX in accordance with instructions provided, and plug onto circuit board at the EHTR relay socket.

The relay is capable of controlling a heat pump, an electric heater (rated up to 3KVA), or the magnetic contactor of a larger electric heater.

Inside the heater (or heat pump), connect two 14 AWG wires in series with the heater thermostat circuitry. Place the heater toggle switch in the "ON" position, and set the thermostat to the desired temperature.

Run the two wires to the high voltage compartment of the LX-30 Power Center, and connect to LINE 1 and LOAD 1 terminals of the electric heater relay.

CP30 specifications

The Pentair CP30 is a cutting-edge water management solution designed to enhance residential and commercial water systems' efficiency and reliability. Renowned for its advanced features and innovative technologies, the CP30 excels in both performance and user convenience.

One of the standout characteristics of the Pentair CP30 is its robust motor. Equipped with a powerful, energy-efficient motor, this device operates quietly, ensuring minimal disruption in any setting. The motor’s intelligent design allows for optimal power consumption while maintaining high flow rates, making it ideal for various applications, including irrigation, water supply, and boosting water pressure.

The CP30 is also designed with durability in mind. Constructed from high-quality materials, it is engineered to withstand harsh conditions and deliver reliable performance over time. Its corrosion-resistant components ensure longevity, making it an excellent investment for those seeking a long-lasting water management solution.

In terms of technology, the Pentair CP30 incorporates advanced pump features like variable speed operation. This technology allows users to adjust the pump speed according to specific needs, thus optimizing performance and reducing energy costs. The ability to fine-tune the system contributes significantly to water conservation, a crucial factor in today’s sustainability-driven world.

Another critical feature of the CP30 is its integrated smart technology. The unit comes with advanced monitoring capabilities that provide real-time data on performance metrics. Users can easily track water usage, pressure levels, and energy consumption, empowering them to make informed decisions about their water systems. This capability not only facilitates maintenance but also enhances operational efficiency.

Furthermore, the CP30 is designed for easy installation and maintenance, minimizing downtime and disruptions. The user-friendly interface allows for straightforward setup, and routine maintenance tasks can be performed without extensive technical knowledge, making it accessible for a wide range of users.

Safety is a paramount consideration in the design of the Pentair CP30. It features built-in protection mechanisms such as thermal overload protection and automatic shut-off capabilities. These safety features ensure that the pump operates within safe parameters, reducing the risk of damage and prolonging service life.

In summary, the Pentair CP30 stands out as a versatile and dependable water management solution. Its combination of high efficiency, durability, advanced technology, and user-friendly features makes it an exemplary choice for anyone looking to enhance their water system's performance and reliability.