Graco LC0252, LC0253, LC0250, LC0251 Equipment With Grounding Plug, Hard-Wired Equipment

Page 3

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

WARNING

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the system can cause elec- tric shock.

Equipment With Grounding Plug

•Turn off and disconnect power cord before servicing equipment.

•Use only grounded electrical outlets.

•Use only 3-wire extension cords.

•Ensure ground prongs are intact on power and extension cords.

•Do not expose to rain. Store indoors.

Hard-Wired Equipment

•Turn off and disconnect power at main switch before disconnecting any cables and before servicing equipment.

•Connect only to grounded power source.

•All electrical wiring must be done by a qualified electrician and comply with all local codes and regu- lations.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS forms from distributor or retailer.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

312761B

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PR70 and PR70v Integrated Heat Supplied Manuals ContentsEquipment With Grounding Plug Hard-Wired EquipmentKey Component IdentificationInstallation GroundingConnect Electrical Cord Install Low Power Temperature Control Modules Connect 3-wire Module PowerInstall New Low Power Temperate Control Module Adjust Rotary Switch Low Power Temperature Control Module Rotary Switch LocationSwitch Setting Zone Cable Connections SetupData Cable Connections Operation Maintenance Install Upgrade TokenClean Signal Description TroubleshootingDiagnostic Information Simplified Wiring SchematicWiring Schematic, Page 1 Wiring SchematicWiring Schematic, Page 2 109 PartsLC0253 LC0250 Terminal Circuit Breaker Heated Hose Circuit Breakers Installed HeatedHeated Tank Assembly Circuit Breakers Installed Heated Circuit BreakersParts Technical Data Dimensions2 Zone 4 Zone Assemblies In. mm Graco Ohio Information Graco Ohio Standard Warranty

LC0253, LC0250, LC0251, LC0252 specifications

The Graco LC0252, LC0251, LC0250, and LC0253 are a series of advanced airless paint sprayers designed to optimize efficiency and performance in various painting applications. These models are particularly well-suited for professional painters, contractors, and DIY enthusiasts who require reliable and high-quality results.

One of the standout features of the Graco LC series is its robust and durable design. Constructed with high-quality materials, these sprayers are built to withstand the rigors of frequent use in diverse environments. The ergonomic design facilitates easy handling and maneuverability, reducing fatigue during extended periods of operation. Additionally, the sprayers are lightweight, making them convenient for both interior and exterior projects.

A key technology integrated into these models is Graco's ProConnect system, which allows for quick and easy nozzle changes without the need for tools. This feature is particularly beneficial for users who frequently switch between different paint types or spraying techniques. The LC series also boasts a powerful motor that ensures a consistent and even spray pattern, enhancing the overall finish quality on various surfaces.

In terms of versatility, the Graco LC0252, LC0251, LC0250, and LC0253 are compatible with a wide range of coatings, including primers, paints, and stains. This adaptability makes them ideal for a variety of applications, from residential projects to larger commercial tasks. Furthermore, the adjustable pressure control allows users to customize the spray output to suit specific requirements, ensuring optimal coverage and precision.

Another notable characteristic is the easy-to-clean design, which simplifies maintenance and prolongs the lifespan of the equipment. The LC series also features an integrated suction system that allows for fast and efficient color changes, minimizing downtime between projects.

Safety is also a priority, with the inclusion of features such as a safety lock and a sturdy base to prevent tipping during operation. Overall, the Graco LC series stands out as a reliable and effective choice for anyone looking to achieve professional-quality results in their painting endeavors. Its combination of user-friendly features, advanced technologies, and versatile applications makes it an excellent investment for both seasoned professionals and hobbyists alike.
Top Page Image Contents