Programming With Code Search
If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try search- ing for your code by following the steps below.
1. Turn on the device you wish to program.
2. Press and hold SETUP until the
INDICATOR LIGHT lights, then release
SETUP.
3. Press and release the device button for the device you are programming (TV, VCR, CAB/DVD).
The INDICATOR | BLINK | |||
|
| |||
LIGHT will blink once. |
|
| ||
For AUX, press AUX |
|
| ||
then the device button |
|
| ||
you are assigning to AUX. |
|
| ||
|
|
|
|
|
4. Press and release POWER |
|
| ||
until your device turns |
|
| ||
off. Important: You |
|
| ||
may have to press |
|
| ||
POWER up to 200 times. |
|
| ||
|
|
|
| |
5. When your device turns |
|
| ||
off, press the ENTER |
|
| ||
button, the INDICATOR |
|
| ||
LIGHT will go off. |
|
| ||
|
| |||
8