LAMP MODULE
The Lamp Module (sold separately) may be used to control any incandescent lamp rated up to 300W. It is not suitable for other types of lamps such as fluorescent or energy saving lamps, or lamps which include a dimmer control.
Caution: Do not connect an appliance such as a coffee pot or heater to the Lamp Module. It may damage the Module and the appliance and could cause a fire hazard.
1.Set the House Code to ‘A’ and the Unit Code to ‘2.’
2.Plug a lamp into the Lamp Module.
3.Plug the Lamp Module into a convenient AC outlet.
CONTROLLING X10
MODULES
If you have installed the Transceiver Module (sold separately) you can control it and other X10 modules as follows:
1.Press and release the X10 button.
2.Use the number buttons to enter the Unit Code number of the chosen module. (You do not need to enter ‘0’ first for a single digit number.)
3.Press the appropriate button for the function you require, e.g. Ch+ (see below).
X10 Functions: |
|
On: | CHANNEL + |
Off: | CHANNEL – |
Bright: | VOLUME + |
Dim: | VOLUME – |
All Lights On: | POWER |
All Modules Off: | MUTE |
Note: You cannot dim or brighten an Appliance Module. If the module was off and you press Bright or Dim (VOLUME+ or
26 | 27 |