Programming TV, VCR, DVD, Audio Devices | Contec RT-U50-25S specification

Scientific Atlanta
Explorer®	004
Explorer® (#, *)	010
Explorer® (Blue Ridge)	011
Explorer (WorldGate™)	012
8600X	005
8600	006
Pace
510 Digital	004
HD Digital	010
Pioneer
Voyager™	004
BA-V1000, BA-V2000	007
Tocom
5503VIP, 5507, 5508	008
Zenith
MM 2500	009
Digital	013

5. Programming TV, VCR, DVD, AUDIO Devices

Code Entry Programming

1.Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want to program the remote to operate.

2.Press [SELECT] then [MUTE] together until the power / mode buttons illuminate in slow-rotation (i.e. CABLEÆ TV

ÆVCR Æ DVD Æ AUDIO Æ CABLE…).

3.a. To program your TV, locate the 3-digit code for your brand in the TV Setup Code list and enter it on the keypad of the remote control. Entry of the correct code will cause your TV to turn off. If multiple codes are listed for your brand, you may have to enter different codes until your TV turns off.

b.As soon as you have entered a 3-digit code that turns your TV off, press [MUTE].

1.If the TV turns back on, press [SELECT] to lock in the code. The power / mode buttons will blink 3-times and go out.

2.If the TV does not turn back on, enter a different 3-digit setup code until your TV turns back on. Then press [SELECT] to lock in the code. The

power / mode buttons will blink 3-times and go

out.

4.To program your VCR or DVD, refer to the VCR or DVD Setup Code lists and repeat steps 2 and 3 above.

5.To program your AUDIO equipment, refer to the AUDIO Setup Code list and repeat steps 2 and 3 above.

Point and Press® Programming

This method allows you to program the remote control without using codes. Instead, the remote control automatically finds the correct command that you select in a variety of codes until you find the code that operates your device. You then lock in the correct code as described below.

The following instructions describe how to program your remote control using the [CH ▲] or [CH ▼] buttons ("Power" function during programming). You may also program your remote control using other buttons / functions as described in Section 14. When using this method, there are several important points to remember:

•The order in which you program your electronic devices is not important.

•There may be several codes that turn your electronic devices on / off (or perform other functions). Once you lock-in a code, be sure to check the available functions for that device (i.e. TV - Vol ▲/▼, Mute, TV Input , VCR - Play, Stop..., DVD - Play, Stop..., AUDIO - Vol▲/▼, Mute) to see if they are operating.

•While the remote is searching for the correct setup code(s) for your electronic devices, it is possible that other (previously programmed) devices may turn on / off (or perform other functions). If this occurs, continue pressing the [CH ▲] or [CH ▼] buttons (or the buttons described in Section 14) until you find the correct code for the device you are programming.

•It may take several minutes for the remote to find the correct code that turns your device off (or performs another selected function). During this time, the power / mode buttons will illuminate in fast-rotation (i.e. CABLE Æ TV Æ VCR Æ DVD Æ AUDIO Æ CABLE…).

Programming your electronic devices using the [Ch ▲] or

[Ch ▼] buttons (“Power” function during programming)...

1.Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want to program the remote to operate.

2.Press [SELECT] then [MUTE] together until the power / mode buttons illuminate in slow-rotation (i.e. CABLE Æ TV Æ VCR Æ DVD Æ AUDIO Æ CABLE…).

3.Press and hold the [CH ▲] button until one device turns off. While you are pressing the [CH ▲] button, the power /

mode buttons will illuminate in fast-rotation. As soon as one device turns off, release the [CH ▲] button.

4.Press [MUTE]. If the device that turned off...

a.Turns back on, press [SELECT] to lock in this code. The power / mode buttons will blink 3-times and go out.

b.Does not turn back on, press [CH ▼] one step at a time until that device turns back on. Each time you press the [CH ▼] button, the power / mode buttons will illuminate once in reverse fast-rotation (AUDIO Æ DVD Æ VCR Æ TV Æ CABLE).

Once you have found a code that turns the device on / off, press [SELECT] to lock in this code. The power / mode buttons will blink 3-times and go out.

5.Repeat steps 2 to 4 above for each of the remaining electronic devices you wish to program the remote to operate.

6.Programming TV / VCR Combinations

1.First, turn on your TV / VCR combination device and install a VHS tape.

2.Next, program your remote to operate the TV functions.

Using the Code Entry Programming method described in Section 5, find a TV Setup Code that operates the TV functions (power, Vol, ▲/▼, Mute) of your TV / VCR unit.

3.Last, program your remote to operate the VCR functions.

Using the Code Entry Programming method described in Section 5, enter, lock and test each 3-digit VCR Setup Code for your brand until a code is found that operates the transport functions (play, stop, rew, fwd, pause, rec) of your TV / VCR unit.

7.Programming Your TV / DVD or TV / VCR / DVD Combination.... .................................................................

1.First, turn on your TV / DVD combination device and install

aDVD.

2.Next, program your remote to operate the TV functions.

Using the Code Entry Programming method described in Section 5, find a TV Setup Code that operates the TV functions (Power, Vol ▲/▼, Mute) of your TV / DVD unit.

RT-U50-25S specifications

The Contec RT-U50-25S is an advanced temperature and humidity data logger designed for diverse applications, ranging from industrial environments to laboratories. Notable for its compact design and robust performance, the RT-U50-25S serves as a critical tool for monitoring environmental conditions accurately.

One of the main features of the RT-U50-25S is its high precision in measuring temperature and humidity. It boasts a temperature measurement range of -20°C to 60°C, with an accuracy of ±0.3°C. For humidity, it provides a range of 0% to 100% RH, with an accuracy of ±2% RH. This level of precision ensures that users can rely on the data collected for critical processes that depend on specific environmental conditions.

The device also integrates a large storage capacity, capable of storing up to 16,000 data points. This extensive memory means users can monitor conditions over prolonged periods, making it ideal for long-term studies or continuous monitoring applications. The data can be easily accessed and downloaded via USB, allowing for straightforward data management and analysis.

In terms of technology, the RT-U50-25S implements cutting-edge sensors that ensure rapid response times and reliable readings. These sensors are essential for applications where environmental changes can occur swiftly, ensuring timely interventions if necessary. Furthermore, the device operates on a long-lasting battery, allowing for extended periods of use without the need for frequent replacements.

Another standout feature of the RT-U50-25S is its user-friendly interface, which enables easy configuration and operation. The logger includes a simple LED display that provides instant feedback on the device's status, battery level, and current measurements, enhancing usability for operators of varying technical backgrounds.

The Contec RT-U50-25S is also designed with durability in mind. Its protective casing ensures resilience against dust and moisture, making it suitable for diverse working conditions. Whether utilized in a research lab, manufacturing facility, or fieldwork, the RT-U50-25S stands out for its reliability and performance.

In summary, the Contec RT-U50-25S is a powerful temperature and humidity data logger that combines precision, technology, and user-friendliness. With its robust features, it is an invaluable tool for organizations that prioritize environmental monitoring and data accuracy in their operations.