One for All URC-8011, URC-3605, URC-3300 Blink four times, Device’s volume only in its own mode

CHANGING VOLUME LOCK (cont’d)

Locking Volume Control To One Mode

(Global Volume Lock)

2.Enter 9 - 9 - 3 and then press any mode key once (e.g., TV). The LED will blink twice.

3.Now, when you press VOL▲, VOL▼, or MUTE, the volume of the selected device (e.g., TV) will be controlled, regardless of the mode you have selected.

Unlocking Volume Control For A Single Device (Individual Volume Unlock)

1.After performing Global Volume Lock (above),press a desired mode key where you want volume to be unlocked (e.g., DVD/VCR) and controlled within its own mode.

2.Press and and hold SET until the LED (red light) blinks twice, then release SET.

3.Enter 9 - 9 - 3 and then press VOL▼once. The LED will

blink four times.

4.If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked.

5.After selecting a device that has volume unlocked (e.g., DVD/VCR), pressing VOL▲, VOL▼, or MUTE will control the

device’s volume only in its own mode.

Unlocking All Volume Control (Restoring Default Setting)

NOTE: Performing these instructions will restore independent volume control for all pro- grammed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode, etc.).

1.On the remote control, press and hold SET until the LED (red light) blinks twice,then release SET.

2.Enter 9 - 9 - 3 and then press VOL▲once. The LED will

blink four times.

3.Volume will again be independently controlled according to its default states for all programmed devices.

13