Samsung SP56K3HV, SP67L6HV Connecting to an Aerial or Cable Television Network, Rear of the TV

Page 13

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆An outdoor aerial

◆A cable television network

◆A satellite network

◆An indoor aerial

1In the first three cases, connect the aerial or network input cable to the ANT IN jack on the rear of the television.

2If you are using an indoor aerial, you may need to adjust its position when tuning your television until you obtain a picture that is both sharp and clear.

For further details, refer to:

◆“Storing Channels Automatically” on page 18.

◆“Storing Channels Manually” on page 19.

➢When installing or re-installing your TV, be sure to use the supplied coaxial antenna cable. If you connect using a different coaxial cable, there is risk of noise or interference to the screen image. (You must not use another general purpose cable.

Use the 3M/5M/7M cable supplied by Samsung.)

Rear of the TV

or

Cable Television

Network

Connecting a Satellite Receiver or Decoder

In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV.

◆Using a SCART cable

Connect the receiver (or decoder) SCART cable to one of the SCART connectors on the rear of the television.

◆Using a coaxial cable

Connect a coaxial cable to the:

-Receiver (or Decoder) output socket.

-Television aerial input socket.

➢If you wish to connect both a satellite receiver (or decoder) and a VCR, you should connect the:

◆Receiver (or Decoder) to the VCR

◆VCR to the television

Otherwise, connect the receiver (or decoder) directly to the television.

Rear of the TV

Coaxial

SCART

cable

cable

Satellite Receiver/Decoder

English - 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DLP TV Page Contents Symbols Checking Parts Front of the TV SP56K3HV Control PanelTimer Lamp Stand BY/TEMP Connection Panel Side of the TV SP56K3HV For further details about connection, refer to pages 55~59 Rear of the TVInfrared Remote Control Inserting the Batteries in the Remote Control Connecting a Satellite Receiver or Decoder Connecting to an Aerial or Cable Television NetworkUsing a coaxial cable Use the 3M/5M/7M cable supplied by SamsungPlacing Your Television in Standby Mode Switching Your Television On and OffPress the Power Becoming Familiar with the Remote Control Press the Enter button to set the clock Plug & Play FeatureFor further details on settings, refer to the previous If you want to reset this featureChoosing Your Language Press the Menu button Result The main menu is displayedSelect your Country by pressing the … or † button Storing Channels AutomaticallyAuto PAL Secam Ntsc Storing ChannelsManuallyChannel mode Skipping Unwanted Channels This operation allows you to change the programme numbers Sorting the Stored ChannelsAssigning Names to Channels Locking the Channel Using the LNA Low Noise Amplifier Feature Displaying Information Fine Tuning Channel ReceptionChanging the Picture Standard Customizing the Picture Settings Tvpc Setting the Picture PC ModeEnglish RF/AV/S-Video SD-level-Component Mode Positioning and Sizing the screen using ZoomHdmi Mode Selecting the Picture SizeFreezing the Current Picture Viewing the DNIe DemonstrationEmphasizing clear blues Setting the My Colour Control Easy ControlEmphasizing mild greens Emphasizing warm skin coloursSetting the My Colour Control Detail Control Activating Panel Button Lock Setting the Blue ScreenSetting the Film Mode TV Ext.1 Ext.2 AV S-Video Viewing the Picture in Picture PIPTvpip PIP Table of PIP Settings Easy functions of the remote controlSwap button after changing the sub Main pictureUsing the Digital NR Noise Reduction Feature Changing the Sound Standard Choose Standard for the standard factory settingsSound Balance Adjustment Customizing the Sound SettingsAdjusting the Volume Automatically Setting the TruSurround XTSelecting the Internal Mute Setting the Melody SoundDUAL-I↔ DUAL-II Selecting the Sound Mode depending on the modelSetting and Displaying the Current Time If the sleep timer is not yet set, Off is displayed Setting the Sleep TimerSet these by pressing the … or † button Switching the Television On and Off AutomaticallyAuto Power Off AV, S-Video on the TV’s side panel Viewing an External Signal SourcePart Contents Teletext FeaturePress the TTX/MIX button again Displaying the Teletext InformationTo display Press Selecting Display OptionsPressing the corresponding numeric buttons Enter the three-digit page number given in the content byGiven page, press To resume① This end can be fitted with Scart connector Connecting to the External Input/OutputThree RCA connectors Video + AUDIO-L and R Input/Output SpecificationConnecting to the S-Video Input Connecting to the RCA InputConnecting to the PC Input Connecting to the Component InputHDMI/DVI in connector is used for equipment with a DVI out Connecting to the HDMI/DVI CompatibleConnecting the Home Theater System Connecting Home Theater SystemSetting up Your PC Software Windows only +/+ PC Input ModeSetting Up the Remote to Operate Your Cable Box Setting Up Your Remote ControlSetting Up the Remote to Operate Your Set Top Box Setting Up the Remote to Operate Your DVDVCR Remote Control CodesCable BOX Samsung DVD Replacing the Lamp Check the picture contrast and brightness settings Power buttonCheck the volume Normal picture but no sound Check the volumeTechnical Specifications This page is intentionally Left blank Correct Disposal of This Product Contact Samsung WORLD-WIDE

SP 61L6HV, SP 46L6HV, SP56K3HV, SP67L6HV specifications

Samsung's range of high-efficiency air conditioners includes models like the SP67L6HV, SP56K3HV, SP46L6HV, and SP61L6HV, each offering unique features that cater to varying cooling needs while maintaining energy efficiency and comfort.

The SP67L6HV stands out with its robust cooling capacity, making it ideal for larger spaces. Equipped with a sophisticated inverter technology, this model adjusts the compressor speed based on the cooling demand, providing optimal performance and energy savings. Its advanced air filtration system helps remove dust particles and allergens, promoting a healthier indoor environment. Additionally, the SP67L6HV is designed with a sleek, modern aesthetic that seamlessly blends into any room decor.

Meanwhile, the SP56K3HV offers a balance between performance and energy efficiency. This model incorporates Samsung's proprietary Digital Inverter Boost technology, which allows for rapid cooling and energy savings. Its quiet operation ensures minimal disruption, making it suitable for bedrooms or study areas. The user-friendly control system includes a remote option, allowing users to adjust settings with ease.

The SP46L6HV caters to smaller spaces while still delivering reliable cooling. It boasts a compact design without compromising on performance. With features like a turbo cooling mode, this model quickly reaches the desired temperature, perfect for those hot summer days. The low energy consumption makes it an economically sound choice for consumers looking to keep their electricity bills in check.

Lastly, the SP61L6HV offers versatile functionality with its multi-mode operation, providing both cooling and heating capabilities. This all-season utility makes it an ideal choice for regions with fluctuating temperatures. The advanced smart control options allow users to program the unit and monitor energy usage, enhancing overall convenience and efficiency.

Together, these Samsung air conditioning models exemplify the company’s commitment to innovation and user-friendly technology in climate control solutions. With their range of features such as inverter technology, air filtration systems, and smart controls, these units provide effective and efficient air conditioning solutions for various spaces.
Top Page Image Contents