Samsung HL-T5655W manual Operation, Turning the TV On and Off, Plug & Play Feature

Page 16

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the (Power) button on the front panel.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently:

1Press the POWER button on the remote control.

The message Menu language, Shop Mode, Channels and Time will be set. is displayed.

2Press the ENTER button to enter the language.

Press the ▲ or ▼ button to select language, then press the ENTER button.

The message Select Home Mode when installing this TV at home. is automatically displayed.

3Press the ◄ or ► button to select Shop or Home, then press the ENTER button.

➢The default selection is Home.

➢We recommend setting the TV to Home mode for the best picture in your home environment.

➢Shop mode is only intended for use in retail environments.

➢If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the TV panel.

4Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select Start.

➢If the antenna is connected to ANT 1 IN(CABLE), select Cable and if it is connected to ANT 2 IN(AIR), select Air.

➢If both ANT 1 IN(CABLE) and ANT 2 IN(AIR) are connected, select the Air + Cable.

➢In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ◄ button, then press the ▲ or ▼ button.

Press the ► button to select Start, then press the ENTER button.

Contact your local cable company to identify the type of cable system that exists in your particular area.

5The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears.

Press the ENTER button when channel memorization is complete. Clock Mode menu is automatically displayed.

➢ To stop the search before it has finished, press the ENTER button with stop selected.

6Press the ENTER button.

Press the ▲ or ▼ button to select Manual for setting the current time manually, then press the ENTER button. The message Enter the current date and time. is displayed.

➢If you select Auto, Set to daylight saving time. is displayed, then go to step 9. (If you want to set the time automatically, skip to step 9.)

7Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or am/pm. Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER button.

➢You can set the Month, Day, Year, Hour, and Minute directly by pressing the number buttons on the remote control.

8The message Enjoy your watching. is displayed. When you have finished, press the ENTER button.

➢Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.

Continued...

Menu language, Shop Mode,

Channels and Time will be set.

 

 

Start

 

 

 

 

 

Plug & Play

 

 

Select the language of the OSD.

Language

 

 

 

English

 

 

 

 

 

Español

 

 

 

 

 

Français

 

Move

 

Enter

 

Skip

 

 

Plug & Play

 

 

Select Home Mode when installing this TV at

home.

 

 

 

 

 

 

Shop

 

 

Home

 

Move

 

Enter

 

Skip

 

 

Plug & Play

 

 

Select the antennas to memorize.

Air

 

 

 

Start

 

Cable

 

 

 

Start

 

Air + Cable

 

Start

 

Move

 

Enter

 

Skip

 

 

Plug & Play

 

 

Selects a cable signal type for your

location.

 

 

 

 

 

 

Analog

 

 

 

 

STD

 

 

 

Start

HRC

 

 

 

IRC

Digital

 

 

 

 

STD

 

 

 

 

 

 

 

 

 

 

HRC

 

 

 

 

 

 

IRC

 

 

 

 

 

 

 

 

Move

 

Enter

Skip

 

 

Plug & Play

 

 

Auto Program in Progress.

Air

16

 

 

 

 

 

 

 

 

 

 

15%

 

 

Stop

 

 

 

 

 

 

 

Enter

 

Skip

 

 

Plug & Play

 

 

 

Set the Clock Mode.

 

 

Clock Mode

Auto

 

 

 

 

 

Manual

 

 

Move

 

Enter

 

Skip

 

 

Plug & Play

 

 

Enter the current date and time.

Month

Day

 

Year

 

 

--

 

--

 

----

 

 

Hour

Minute

am/pm

 

--

 

--

 

--

 

 

Adjust

 

Move

 

Enter

Skip

Enjoy your watching.

 

 

 

 

OK

 

 

 

 

English - 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DLP TV Guide to Digital TV How difficult is it to receive DTV signals indoors? Contents General Information List of FeaturesViewing Position Checking Parts Viewing the Control PanelSold Separately Buttons on the Lower Part of the PanelIndicator Light Key Remote Control SensorIndicator Lights + VOLViewing the Connection Panel Rear Panel JacksSide Panel Jacks Video AV in 1Remote Control Installing Batteries in the Remote Control Connecting VHF and UHF AntennasAntennas with 300 Ω Flat Twin Leads Antennas with 75 Ω Round LeadsConnecting Cable TV Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels Cable without a Cable BoxConnecting a VCR Video Connection Connecting a Camcorder Connecting a DVD Player/Set-Top Box Connecting a DVD Player/Set-Top Box via Hdmi What is HDMI?Connecting a DVD Player/Set-Top Box via DVI Connecting a Digital Audio SystemWhat is OPTICAL? Digital Audio OUT OpticalConnecting an Amplifier/DVD Home Theater Connecting a PCUsing the D-Sub Cable Using the HDMI/DVI CablePlug & Play Feature Press the Power button on the remote controlOperation Turning the TV On and OffSetting the Clock Automatically If you want to reset this featureUsing the Channel Buttons Using the Number ButtonsAdjusting the Volume Using the ButtonUsing the PRE-CH Button to select the Previous Channel Using the Mute ButtonSelecting the Video Signal-source Viewing the MenusMemorizing the Channels Storing Channels in Memory Automatic MethodStop It takes approximately 3 to 10 minutes to memorize channelsYesNo Setting Up Your Remote Control English Remote Control Codes Brand CodeProduct Code 000 001 BD Record 005007 008 009 010 VCR Record 012To Select the Source To Edit the Input Source NamePicture Control Using Automatic Picture SettingsPicture Making Detailed Picture Settings Changing the Screen Size 169Wide Fit Zoom1Digital Noise Reduction DNIe Digital Natural Image engineSetting the Color Gamut Selecting the Film ModeSetting the Hdmi Black Level Setting the Blue Screen ModeFreezing the Picture Using Automatic Sound Settings Resetting the Equalizer Settings to the Factory DefaultsSound Control Customizing the SoundSetting up DNSe Digital Natural Sound engine Choosing a Multi-Channel Sound MTS Track DigitalPreferred Language Multi-Track OptionsAutomatic Volume Control Reduces the difference in volume level among broadcastersChoosing a Multi-Channel Sound MTS Track Analog Multi-Track SoundSelecting the Internal Mute Channel Control Clearing Scrambled Channels DigitalAdding and Erasing Channels To stop searching scrambled channelsSetting Your Favorite Channels You can set channels you watch frequently as favoritesChannel List /Added Channel List /AllViewing the Channel Lists Labeling Channels Analog Setting the Default Channel List ModeName Fine Tuning Analog Channels Analog Checking the Digital-Signal Strength DigitalReset Signal StrengthUsing Your TV as a Computer PC Display PC DisplayLNA Low Noise Amplifier Display ModesSetting up the TV with your PC How to Auto AdjustResolution Horizontal Vertical Pixel Clock Sync Polarity HDMI/DVI InputAdjusting the Screen Quality Initializing the Image SettingsChanging the Screen Position Press the Enter button to select Image LockChanging the Picture Size PC Mode Setting the Home Theater PCViewing the Current Resolution You can get the resolution information of your PCSetting the Time Setting the Clock ManuallyFunction Description Selecting a Menu LanguageSetting the Sleep Timer Setting the On/Off TimerRestrictions on Game mode Caution Using the Game ModeIf Game Mode is On Using the V-Chip How to Enable/Disable the V-ChipHow to Set up Restrictions Using TV Parental Guidelines Press the Menu button to display the menuHow to set the FV, V, S, L and D sub-ratings Mpaa RatingUsing the V-Chip for Digital channels ButtonRating menu is deactivated Channels. It may take several secondsViewing Closed CaptionsOn-Screen Text Messages Analog CaptionViewing Closed CaptionsOn-Screen Text Messages Digital Digital Captions function operates on digital channelsSetting the Function Help Adjusting the Melody SoundMenu Transparency Level OK Cancel Software UpgradeUpgrading the Software Troubleshooting Please check the digital signal strength and input antennaAppendix Visual quality is of an SDStandard Definition gradeWhy do I need to replace the lamp? When do I need to replace it?Check before lamp replacement Replacing the LampCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications GNU General Public License GPL Version 2, JuneEnglish No Warranty GNU Lesser General Public License Lgpl English English END of Terms and Conditions This page is intentionally Left blank Contact Samsung WORLD-WIDE Contacte con Samsung WORLD-WIDECountry Web Site Address
Related manuals
Manual 68 pages 53.73 Kb
Top Page Image Contents