Hitachi 55VS69A Remote Control for Set-Top Box/Satelite Receiver Functions, Satellite Brand Codes

Page 28

The Remote Control for Set-Top Box/Satelite Receiver Functions

The Remote Control

OPERATING THE PRECODED FUNCTION FOR YOUR SET-TOP-BOX/SATELLITE RECEIVER.

This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set- top-box/satellite systems (refer below for pre-codes).

1.Turn ON your set-top-box/satellite systems.

2.Aim the remote control at the front of your set-top- box/satellite systems.

3.To switch to set-top-box/satellite (STB) pre-coded mode, press and release the SAT button.

4.Hold down the SAT button on the remote and enter the two digit preset code that matches your set- top-box/satellite receiver, as shown below. Release the SAT button.

5.Aim the remote at the set-top-box/satellite receiver and press the POWER button. The remote will turn off your set-top-box/satellite receiver when the correct two digit preset code is entered. When this occurs, the remote control is programmed for your set-top-box/satellite receiver. If the set-top- box/satellite receiver does not turn off, try a different two digit preset code.

6.The remote will now control your set-top- box/satellite receiver.

NOTE: 1. If your set-top-box/satellite receiver cannot be operated after performing the above procedures, your set-top- box/satellite receiver code has not been precoded into the remote.

2.In the unlikely event that your set-top- box/satellite receiver cannot be operated after performing the above procedures, please consult your set-top-box/satellite receiver operating guide.

3.The remote control will remember the codes you have programmed until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure as stated above.

￿SAT (Set-Top-Box/Satellite) button

This button allows the remote to control your set- top-box/satellite receiver by setting it to SET-TOP- BOX/SATELLITE mode.

￿PRE-CODED SET-TOP-BOX/SATELLITE RECEIVER buttons

These buttons transmit the chosen pre-coded set- top-box/satellite codes.

￿EXCLUSIVE TV buttons

These buttons are for operating the TV.

￿

￿

￿

￿

￿

￿

SATELLITE BRAND

CODES

ECOSTAR

03

HITACHI

00

HUGHES

04

RCA

01

SONY

02

SET TOP BOX BRAND

CODES

PANASONIC

05

RCA

06

SAMSUNG

07

ZENITH

08

MY SATELLITE RECEIVER/

 

SET TOP BOX CODE IS: _________________________

NOTE: Refer to instruction manual of the set-top- box/satellite receiver for operation of the buttons exclusively for the set-top- box/satellite receiver.

28

Image 28
Contents LCD Rear Projection Television Important Safety Instructions Read Before Operating EquipmentPower source Public viewing of copyrighted materialLead/Mercury Notice For More INFORMATION, Call 1-800-HITACHIRemote Control Battery Installation and Replacement AccessoriesFirst time use How to set up your new Hitachi Projection Television AntennaLocation ViewingHook-up Cables and Connectors UseFirst time Antenna Connections to Rear Jack PanelQuick Reference Remote Control Buttons and Functions Front Panel Controls Front Input Jacks InputTemp Indicator Power LightLamp Indicator Front Panel Jacks and Connections Front Control Panel ConnectionsRear Panel Connections Monitor OUT & HI-FI Audio OUTInformation from Setup menu see CableCARD SlotDigital Output Capability Installation Recommendation Tips on Rear Panel ConnectionsConnecting a Video and Stereo Audio Source to INPUT1 INPUT5 Connecting External Video SourcesConnecting AN S-VIDEO and Stereo Audio Source to Input 1 DVI to Hdmi Input Connecting External Audio/Video Devices Connecting a Video and Monaural Audio Connecting Optical OUT to AN External Audio AmplifierConnecting Monitor OUT Source to Input 1 ~ InputRemote Control Remote ControlControl How to Use the Remote to Control Your TVRemote ZOOM1/ZOOM2 StandardExpanded Inputs button PICTURE-IN-PICTURE buttonMenu button Exit buttonWhite First time use The Remote ControlChannel CH Down Split Mode PICTURE-IN-PICTURE POP Mode PICTURE-IN-PICTUREPicture-in-Picture PIP PIP buttonPIP Mode PICTURE-IN-PICTURE PIP Specifications TableMain Freeze Split FreezeStrobe Freeze Remote Control for Cable Box Functions Operating the Precoded Function for Your Cable BOXCodes Cable Brand Digital Type CodesRemote Control for Set-Top Box/Satelite Receiver Functions Satellite Brand CodesSET TOP BOX Brand Codes MY Satellite ReceiverOperating the Precoded Function for Your DVD Player Remote Control for DVD FunctionsDVD Brand Codes Operating the Precoded Function for Your VCR Remote Control for VCR FunctionsVCR Brand Codes On-Screen Display On-Screen DisplayVideo Video Screen DisplayColor Temperature Contrast ModeAuto Movie Mode Black EnhancementReset Video Settings Black Side PanelAudio Display On-ScreenDRC Signal Meter Start or Reset optionChannel Manager Auto Channel ScanChannel List Which are your Favorite FAV ChannelsChange Access Code LocksMovie Ratings Motion Picture Ratings TableTV Ratings TV Parental Guide Ratings TableCanadian Ratings Eng Canadian Ratings English TableCanadian Ratings French Chart Alternate Ratings U.S InfoTimers Set The ClockDaylight Saving Correction and press Use the Cursor PAD Or ChannelSet Day/Night Timer Set Sleep TimerUse the Cursor Pads to select DAY Mode on Set Event Timer Event 2, Event 3, Event 4 and then pressSelect Start Time HOUR/MINUTE Select Start Time AM/PM Use the Cursor PADSet The Menu Options SetupSet The Language Set The Power Saving Set The Menu BackgroundSet The Inputs Input 4 Auto LinkAuto RemoteCaption Mode Set The Closed CaptionsCaption Display Analog CaptionsSet The Output Terminals Video OutAudio Out Use Cursor PAD orCableCARD / CableCARD Services Things to Check When UsingCableCARD Information Reset The Software Upgrade NOWReset TV Settings Set The Quick Start OptionsLamp Replacement Lamp ReplacementLamp Replacement Lamp Life120V Lamp Unit Turn clockwise to tighten the lamp cover screw Equipment Care and Troubleshooting TroubleshootingSwitch ON/OFF InformationReception Problems Useful InformationUseful Info FCC InformationDimensions Features and Specifications55VS69A 62VS69A Hitachi UsefulHome Electronics Division Digital Media DivisionLicense Agreements End User License Agreement for Hitachi DTV SoftwareEND User License Agreement for Hitachi DTV Software End User License Agreements for Operating System Software Software License InformationGNU General Public License Version 2, June End User License Agreement for Operating System SoftwarePreamble No Warranty END of Terms and Conditions GNU Lesser General Public License Version 2.1, February UXQWKDWSURJUDPXVLQJDPRGL¿HGYHUVLRQRIWKH/LEUDUySRUWLRQVRIWKH/LEUDU\ZLOOVWLOOIDOOXQGHU6HFWLRQ HQJLQHHULQJIRUGHEXJJLQJVXFKPRGL¿FDWLRQV License AgreementsAppendix AppendixAppendix a Index IndexService Information Page Page Page QR67392

55VS69A, 50VS69A, 62VS69A specifications

Hitachi’s line of projectors, specifically the 62VS69A, 50VS69A, and 55VS69A models, showcases cutting-edge technology and exceptional performance, making them ideal choices for both professional and home entertainment environments. Each of these models is designed to cater to diverse viewing needs, ensuring high-quality image representation and user-friendly features.

The Hitachi 62VS69A stands out with its impressive brightness rating, making it suitable for larger venues and spaces with ambient light. This model incorporates advanced DLP technology, which enhances color accuracy and contrast, providing viewers with a vibrant visual experience. The 62VS69A is equipped with a high native resolution, allowing for sharp detailing in larger formatted images. Additionally, this projector supports various input options, including HDMI and VGA, offering flexible connectivity for a range of devices.

The 50VS69A model, while slightly more compact, does not compromise on performance. It features a high lumen output, ensuring clear visibility even in well-lit environments. This projector is engineered for ease of use, with quick setup options and a user-friendly interface. Its portability makes it an excellent choice for business presentations and mobile users. The 50VS69A also benefits from enhanced lamp longevity, reducing maintenance costs over time.

The 55VS69A bridges the gap between the higher-end 62VS69A and the more compact 50VS69A. It provides a balanced approach with commendable brightness and resolution, making it versatile for both educational and commercial applications. This model prides itself on its excellent color reproduction, thanks to Hitachi’s proprietary color technology. The 55VS69A also features an extensive range of connectivity options, including wireless capabilities, enabling seamless integration with modern devices.

All three models are designed with durability in mind, incorporating robust build quality suited for prolonged usage. They all feature energy-saving modes to enhance efficiency and reduce power consumption. The inclusion of advanced cooling technologies ensures silent operation, allowing for a distraction-free viewing experience. Whether used for corporate presentations, educational purposes, or home cinema, the Hitachi 62VS69A, 50VS69A, and 55VS69A projectors offer a perfect blend of performance, flexibility, and reliability, making them standout choices in the projector market.