Hitachi 50VX500, 50V500A, 60VX500 important safety instructions Set The Inputs, Video 2 Auto Link

Set The Inputs

Use this feature to give a name to any of the five video inputs.

THUMB

STICK

Setup

Menu Preference

Screen Saver

Set The Clock

Set The Inputs

Set The Color System

Set Black Side Panel

Set Event Timer Set Closed Captions

Move SEL Select

THUMB

STICK

SELECT

Video 2 Auto Link

Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to input 2.

THUMB

STICK

ON-SCREEN DISPLAY

Use THUMB STICK , , or , then press down on THUMB STICK to change Auto Link setting.

When Auto is selected, the TV will turn on and tune to Video2 automatically, when the Video2 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.

When Remote is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed.

This is convenient when you want to record a movie with your VCR and watch it later.

Select Off to disable this function.

Press EXIT to quit menu.

NOTES: 1. Once the TV has been turned on using the Auto Link feature, it must be reset before Auto Link is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.

2.When using Remote mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button.

3.If no remote control button is pressed after the TV is turned on by Auto Link, the TV will automatically turn off after three hours.