Hitachi 60v500, 50V500 important safety instructions Channel List, Scan

CHANNEL MANAGER

Channel

List

This function allows you to review which channels are labeled (Ch ID), which have been added to Channel Memory (Scan), and which are protected by Lock.

Chan. Manager
Ant. A
Channel Source
Antenna	Cable(1)	Cable(2)
Auto Channel Scan		Start
Channel List
Move SEL	Select

THUMB

STICK

SELECT

Chan. Manager
Channel List
Ch#	Scan	CH ID	Lock
2	Off	--------
3	Off	--------
4	Off	--------
5	Off	--------
6	Off	--------
7	Off	--------
8	Off	--------
9	Off	--------
Move	SEL Return

Press THUMB STICK or Press EXIT to quit the menu.

Scan

to review more channels.

Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to the remote control channel or buttons.

Chan. Manager
Ant. A
Ch#		Scan	CH ID	Lock
2		Off	--------
3		Off	--------
4		Off	--------
5		Off	--------
6		Off	--------
7		Off	--------
8		Off	--------
9		Off	--------
Move	SEL	Return

THUMB

STICK

THUMB

STICK

Chan. Manager
	Ant. A
[	Ch#	Scan		CH ID	Lock
	2	Off		--------	]
	3	Off		--------
	4	Off		--------
	5	Off		--------
	6	Off		--------
	7	Off		--------
	8	Off		--------
	9	Off		--------
	Move	Return	SEL	Tune

	Chan. Manager
	Ant. A
[	Ch#	Scan	CH ID	Lock
	2	Off	--------	]
	3	Off	--------
	4	Off	--------
	5	Off	--------
	6	Off	--------
	7	Off	--------
	8	Off	--------
	9	Off	--------
	Move	Set

THUMB

STICK

Chan. Manager

Ant. A

[	Ch#	Scan	CH ID	Lock
	2	On	--------	]

3	Off --------
4	Off --------
5	Off --------
6	Off --------
7	Off --------
8	Off
9	Off --------
Move	Set

ON-SCREEN DISPLAY

To add (Scan-On) or skip (Scan-Off) additional channels while in Channel Manager, THUMB STICK to highlight the channel number,

then THUMB STICK		or	to highlight other channels. Once the desired channel is highlighted, THUMB STICK to scan column,
then THUMB STICK		or	to select ON or OFF.
NOTE:	Lock feature cannot be selected or set in Channel Manager.

55