Remote Control

You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left and right sides of the TV’s remote control receiver. You can also use your remote control to operate your VCR, Cable box, DVD player or some Samsung Set-top boxes. See pages 32~33 for details.

1.POWER

Turns the TV on and off.

2.P.MODE

Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.)

3.ANTENNA

Press to select “AIR” or “CABLE”.

4.CHANNEL NUMBER

Press to directly tune to a particular channel.

5.-

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “-” and “3”.

6.VOL +, VOL -

Press to increase or decrease the volume.

7.MUTE

Press to mute the TV sound.

8.Anynet

Runs the Anynet view functions and sets up Anynet devices. Please refer to the Anynet Owner’s Instruction.

9.MENU

Displays the main on-screen menu.

10.CH.LIST

Displays the channel list.

11.FAV.CH (Favorite Channel)

Press to switch between your favorite channels.

12.MODE

Selects a target device to be controlled by the Samsung remote control (i.e., TV, STB, VCR, CABLE, or DVD).

13.PRE-CH

Tunes to the previous channel.

14.SOURCE

Press to display all of the available video sources (i.e., TV, Set-Top Box, VCR, DVD, DTV).

15.CH /

Press to change channels.

Moves from one set of screen information to the next in TV Guide menu.

16.INFO

Press to display information on the TV screen.

17.EXIT

Press to exit the menu.

18.▲, ▼, œ, √, ENTER

Press to select highlight up, down, left, or right. While using the on-screen menus, press ENTER to activate (or change) a particular item.

19.MTS (Multichannel Television Stereo)

Press to choose Stereo, Mono or SAP (Secondary Audio Program).

20.STILL

Press to pause the current screen.

21.P.SIZE

Press to change the screen size.

22.DNSe

DNSe enhances the sound quality, automatically controls output, and prevents sound distortion. Press this button to set it On or Off.

23.DNIe (Digital Natural Image engine)

Activates DNIe Demo mode.

24.SET

Used during set up of this remote control, so that it will work compatibly with other devices (some Samsung Set-top boxes, VCR, Cable box, DVD, etc.)

25.SLEEP

Press to select a preset time interval for automatic shut off.

26.CAPTION

Controls the caption decoder.

27.VCR/DVD Controls

Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward.

28.RESET

If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again.

The blue button is only used during the channel list as an EXIT button.

English - 13