Samsung HL-R5066W manual Labeling the Channels, Name

Labeling the Channels

Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below to the channel number.

Press the CH	or CH	button to tune to the channel that
1 will be labeled.

2 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.

Press the … or † button to select “Name”, then press the ENTER button.

3 Press the … or † button to move to the channel to be assigned to a new name, then press the ENTER button. Press the … or † button to select a letter, a number or a blank. (Results in this sequence: A...Z, 0...9, +, -, ✽, /, blank).

Channel

Input	Antenna	: Air	√
Picture	Auto Program		√
	Add/Delete		√
Sound	Favorite Channels		√
Channel	Name		√
	Fine Tune		√
Setup	Signal Strength		√
Guide	LNA	: On	√
	Move	Enter	Return

				Name
Input
			▲		OK
Picture	Air	2	A	Clear
	Air	3	▼
Sound				Clear
	Air	4		Clear
Channel	Air	5		Clear
Setup	Air	6		Clear
			▼
Guide			Move	Adjust	Return

NOTE

•If you add or delete a TV channel, the labeled channels will also be added or deleted.

4 Press the √ button to switch to the next field, which will be selected.

Select a second letter or digit pressing … or † button, as above.

Repeat the process to select the last three digits.

When you have finished, press the ENTER button. To erase the assigned new name, select “Clear” by pressing the œ or √ button, then press the ENTER button.

Press the EXIT button to exit.

Input

Picture

Sound

Channel

Setup

Guide

			Name
				OK
Air		▲
	2	CNN02	Clear
Air	3	▼
			Clear
Air	4		Clear
Air	5		Clear
Air	6		Clear
		▼
		Move	Adjust	Return

English - 47