Samsung HC-P5241W, HC-P4741W manual Connecting a VCR, Connecting a Second VCR to Record from the TV

Page 15

I N S T A L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10-13). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Connect a coaxial cable between the “ANT IN” terminal on the TV and the ANTENNA OUT terminal on the VCR.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

2

Connect a set of audio cables between the “AV IN 1 (L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and AUDIO OUT jacks on the VCR.

If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.

3

Connect a video cable between the “AV IN 1 (VIDEO)” (or “AV IN 2 (VIDEO)”) jack on the TV and the VIDEO OUT jack on the VCR.

Follow the instructions in “Viewing a VCR or

Camcorder Tape” to view your VCR tape.

•Also, you can connect to “AV 3” on the side panel of TV.

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

1

Connect a set of audio cables between the “AV OUT (L, R)” jacks on the TV and the AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or rear of the VCR.)

2

Connect a video cable between the “AV OUT (VIDEO)” jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

14

Image 15

Contents Instructions Instructions Page Installation Your New Digital TVOperation Special Features TroubleshootingAppendix Accessories List of FeaturesFamiliarizing Yourself with Your New TV Audio Input Connection Jacks Side or FrontVideo Input ´ Video InputComponent Input jacks Connection Jacks RearAntemma terminal ¨ Audio Input jacks ´ Audio/Video Output jacks+100 Remote ControlReset ¨ Number buttonsAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasSeparate VHF and UHF Antennas Antennas with 75-ohm Round LeadsConnecting Cable TV Cable without a Cable BoxCable with a Cable box that Descrambles All Channels This terminal might be labeled ANT IN, VHF IN, or simply Connecting to a Cable Box that Descrambles Some ChannelsConnecting a Second VCR to Record from the TV Connecting a VCRConnecting to Y, PB, PR Connecting a DVD PlayerConnecting a Camcorder Connecting a Digital TV Set-Top BoxInstalling Batteries in the Remote Control Turning the TV On and Off Plug & Play FeatureFor details, see Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Alternate method Adjusting the Screen Automatically Self FocusRemoving the Self Focus Message from the Display Deactivating the Automatic Execution of the Self FocusMemorizing the Channels Selecting the Video Signal SourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Changing Channels Using the Channel ButtonsUsing the Number Buttons Using the Previous ChannelSelecting Your Favorite Channels To Store Your Favorite ChannelsTo View Your Favorite Channels Labeling the Channels Customizing the Picture Picture ControlUsing Automatic Picture Settings Customizing the Sound Adjusting the VolumeUsing the Mute Button Sound ControlUsing Automatic Sound Settings Option 1 Setting the Clock Manually Setting the ClockOption 2 Setting the Clock Automatically ATL Setting the Signal Source Viewing an External Signal SourceAssigning Names to External Sources Chapter Four Fine Tuning ChannelsPress the … or † button to select Changing the Screen SizeSelecting the Color Tone Digital Noise ReductionFreezing the Picture Setting the Blue Screen ModeChoosing a Multi-Channel Sound MTS track Setting the On/Off Melody Auto VolumeBBE Viewing Closed Caption Information Caption Mode Channel Field Setting the On/Off Timer Setting the Sleep Timer How to Change Your Password Using the V-ChipHow to Enable/Disable the Rating Controls How to Set up Restrictions Using the TV Parental Guidelines How to Set up Restrictions Using the Mpaa Rating Mpaa Rating System Movies TV FCC Content CategoryImportant Notes About Parental Locks TV FCC Age-Based RatingsHow to Set up Restrictions Using the Canadian English How to Set up Restrictions Using the Canadian French Customizing Your Remote Control Remote Control Codes VCR Codes Cable Box Codes DVD Codes Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications M O M O M O BP68-00284A-02