Hitachi 46F510 important safety instructions Channel List, Scan

CHANNEL MANAGER

Channel

List

This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory (SCAN), and which are protected by LOCK.

Chan. Manager
Ant. A
Channel Source		Cable(1)	Cable(2)
Antenna
Auto Channel Scan			Start
Channel List
Move SEL	Select

SELECT

Chan. Manager
Channel List		CH ID	Lock
Ch#	Scan
2	Off	--------
3	Off	--------
4	Off	--------
5	Off	--------
6	Off	--------
7	Off	--------
8	Off	--------
9	Off	--------
Move	SEL Return

Press CURSOR G or H to review more channels. Press EXIT to quit the menu.

Scan

Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to the remote control channel G or H buttons.

Chan. Manager
Channel List		CH ID	Lock
Ch#	Scan
2	Off	--------
3	Off	--------
4	Off	--------
5	Off	--------
6	Off	--------
7	Off	--------
8	Off	--------
9	Off	--------
Move	SEL Return

Chan. Manager
	Channel List			CH ID	Lock
[	Ch#	Scan
	2	Off		--------	]
	3	Off		--------
	4	Off		--------
	5	Off		--------
	6	Off		--------
	7	Off		--------
	8	Off		--------
	9	Off		--------
	Move	F Return	SEL	Tune

	Chan. Manager
	Channel List		CH ID	Lock
[	Ch#	Scan
	2	Off	--------	]
	3	Off	--------
	4	Off	--------
	5	Off	--------
	6	Off	--------
	7	Off	--------
	8	Off	--------
	9	Off	--------
	Move	Set	SEL	Return

	Chan. Manager
	Channel List		CH ID	Lock
[	Ch#	Scan
	2	On	--------	]
	3	Off	--------
	4	Off	--------
	5	Off	--------
	6	Off	--------
	7	Off	--------
	8	Off	--------
	9	Off	--------
	Move	Set	SEL	Return

ON-SCREEN

To add (Scan-On) or skip (Scan-Off) additional channels while in Channel List, CURSOR F to highlight the channel number, then CURSOR G or H to highlight other channels. Once the desired channel is highlighted, CURSOR E to scan column, then CURSOR G or H to select ON or OFF.

NOTE: Lock feature cannot be selected or set in CHANNEL LIST.

DISPLAY

43