One for All URC 4700 Learning The Codes Programmed Into, Searching ForYour Code, Press 9 9

3.	Enter the first four-digit
	Cable Converter or DBS
	Satellite code listed for your
	brand in the “SETUP
	CODES FOR CABLE
	CONVERTERS” or “SETUP
	CODES FOR DBS
	SATELLITES” section. If
	you perform this procedure
	correctly, the red light will
	blink twice when you enter
	the final digit of your code.
4. POWER Aim the One For All Access
	4 at your Cable Converter
	or DBS Satellite and press
	POWER. Your Cable
	Converter or DBS Satellite
	should turn off. If your Cable
	Converter or DBS Satellite
	does not respond, repeat
	steps 2-4, trying each code
	listed for your brand until
	you find the one that
	operates your Cable
	Converter.
5.	Your One For All Access 4

Northcoast	0314, 0671
Novaplex	0618
Oak	0019, 0007
Optimus	0021
Panasonic	0021, 0107, 0000
Panther	0637
Paragon	0000
Philips	0153, 0025, 0027, 0028,
	0029, 0030, 0031, 0242,
	0290, 0334, 0649
Pioneer	0753, 0533, 0144, 0023,
Popular	0260
Mechanics	0400
Prelude	0770
Pulsar	0000
RCA	0021
RadioShack	0015, 0315
Realistic	0207, 0241
Recoton	0400
Regal	0020, 0259, 0273, 0279
Regency	0002
Rembrandt	0011, 0070
Runco	0000
SL Marx	0040
Samsung	0040, 0144
Scientific Atlanta	0477, 0008, 0017, 0006
Seam	0510
Signal	0015, 0040
Signature	0011
Sprucer	0021, 0307

Locate the brand name of your 2nd TV in the “SETUP CODES FOR TVs” section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your One For All Access 4 to operate your 2nd TV.

To program the One For All Access 4 to operate your 2nd TV:

1.	Turn on your 2nd TV.
2. AUX	Press AUX and release.
	Press and hold SETUP until
SETUP	the One For All Access 4’s
	red light blinks twice, then
	release SETUP.

3.Enter the first four-digit TV code listed for your brand in the “SETUP CODES FOR TVs” section. If you perform this procedure correctly, the red light will blink twice when you enter the final

digit of your code.

NOTE: To search for the codes of your other components, repeat Steps 1 through 5, only substitute the appropriate device key (VCR, CBL or AUX) for the component you are searching for.

*If you are searching for your VCR code, you may want to use the PLAY key instead of the POWER key to search for your code. When your VCR starts to play, press SETUP to lock in your code.

Learning The Codes

Programmed Into The

One For All Access 4

If you have set up the One For All Access 4 using the “Searching For Your Code” procedure, you may need to find out which four-digit code is operating your equipment. Use this procedure after you have set up your components to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV after setting up your

is now programmed to

operate your Cable

Converter or DBS Satellite.

Write your Cable Converter

or DBS Satellite code in the

boxes to the left for future

reference.

NOTE: If your original cable converter remote control did not have an “ON” key, press CH▲ on the One For All Access 4 to turn your Cable Converter ON.

Remember, if you want to use your One For All Access 4 to operate your Cable Converter or DBS Satellite, press the CBL key first.

StarSight	0422, 0542
Starcom	0003, 0015, 0047
Stargate	0015, 0040, 0770
Starquest	0015
Sylvania	0001
TFC	0310
TV86	0063
Tandy	0258
Tatung	0097
Teknika	0146
TeleCaption	0221
Teleview	0040
Texscan	0001
Timeless	0418
Tocom	0012, 0013, 0059
Toshiba	0000
Tusa	0015
Unika	0022, 0153, 0207, 0241,
	0309
United Artists	0007
United Cable	0003

4. POWER

5.

Aim the One For All Access 4 at your 2nd TV and press POWER. Your 2nd TV should turn off. If your 2nd TV does not respond, repeat steps

2-4, trying each code listed for your brand until you find the one that operates your 2nd TV.

Your One For All Access 4 is now programmed to operate your 2nd TV. Write your 2nd TV code in the boxes to the left for future reference.

TV using the “Searching for Your Code” procedure:

1.	TV	Press TV and release.
		Press and hold SETUP until
	SETUP	the One For All Access 4’s
		red light blinks twice, then
		release SETUP.
2. 9-9-0Press 9 - 9 - 0.
3. 1		For the first digit of your
		four-digit code, press 1, wait
		3 seconds and count the
		number of times the red
		light (LED) blinks on the
		One For All Access 4. If the
		light does not blink when
		you press the number 1, the

SETUP CODES FOR CABLE CONVERTERS

ABC	0001, 0003, 0007, 0008,
	0011, 0013, 0014, 0017,
	0047
Allegro	0153, 0315
Antronix	0022, 0207, 0241
Archer	0797, 0022, 0039, 0153,
	0207, 0241, 0309
BBT	0267
Belcor	0056
Cable Star	0056
Cabletenna	0022
Cableview	0022
Century	0153, 0309
Citizen	0153, 0309, 0315
Colour Voice	0025, 0031
Comband	0232, 0233
Comtronics	0040, 0060
Contec	0019
Digi	0637
Eastern	0002
Electricord	0078
Emerson	0797
Everquest	0015, 0040

Universal	0153, 0022, 0039, 0056,
	0077, 0078, 0191, 0207,
	0241
Videoway	0250
Viewstar	0063, 0027, 0060, 0211,
	0258, 0289
Zenith	0525, 0000, 0054
Zentek	0400

SETUP CODES FOR DBS SATELLITES

AlphaStar	0772
Echostar	0775
ExpressVu	0775
General
Instrument	0361
HTS	0775
Hitachi	0819
Hughes Network
Systems	0749
Jerrold	0627, 0361
Magnavox	0722, 0724
Memorex	0724
Panasonic	0701
Philips	0722, 0724

Remember, if you want to use your One For All Access 4 to operate your 2nd TV, press the AUX key first.

Searching ForYour Code

If your TV, VCR or Cable Converter does not respond to the One For All Access 4 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the One For All Access 4 to operate your TV, then:

1.Turn on your TV.

2. TV	Press TV and release.
	Press and hold SETUP until
SETUP	the One For All Access 4’s
	red light blinks twice, then
	release SETUP.

		digit is zero.
4.	2	For the second digit, press
		2, wait 3 seconds and count
		the number of times the red
		light (LED) blinks on the
		One For All Access 4. If the
		light does not blink when
		you press the number 2, the
		digit is zero.
5.	3	For the third digit, press 3,
		wait 3 seconds and count
		the number of times the red
		light (LED) blinks on the
		One For All Access 4. If the
		light does not blink when
		you press the number 3, the
		digit is zero.
6.	4	For the fourth and final digit,
		press 4, wait 3 seconds and

Focus	0400
FutureVision	0649
GC Electronics	0056, 0207
GE	0232, 0233
GMI	0057
Garrard	0153, 0309
Gemini	0015, 0057, 0070, 0242
General
Instrument	0476, 0003, 0011
Goldstar	0040, 0144
Goodmind	0797
Hamlin	0259, 0009, 0020, 0034,
	0273
Hitachi	0011
Hytex	0007
Jasco	0153, 0309, 0315

Primestar	0627, 0361
RCA	0566
Sony	0639
Toshiba	0790
Uniden	0724

Programming the AUX key:

The AUX key is already set up to accept codes for a second TV. If you would like to set up the AUX key for a second TV, follow the instructions listed below. If you would like the AUX key to control a second VCR or Cable Converter, follow the instructions in the “Re-assigning Device Keys” section to

3.9-9-1

4.POWER

TV

Press 9 - 9 - 1.

Slowly alternate between pressing POWER* and TV until your TV turns OFF.

Make sure that the One For All Access 4 is aimed at your TV during the search. You may have to press this sequence of buttons (POWER* then TV) up to 100 times to search the entire library of codes.

count the number of times the red light (LED) blinks on the One For All Access 4. If the light does not blink when you press the number 4, the digit is zero. Now you have your four-digit code.

NOTE: To find out the code for your other components, repeat Steps 1 through 6, only substitute the appropriate device key (VCR, CBL or AUX) for the component code you wish to learn.

Jerrold	0476, 0003, 0012, 0014,
	0011, 0015, 0024, 0047
Linsay	0440
Macom	0033
Magnavox	0027, 0069, 0334
Memorex	0000
Movie Time	0063, 0078, 0156
NSC	0063, 0070, 0156

re-assign the AUX key to accept VCR or Cable Converter codes. If you are setting up a second TV:

Locate the brand name of your 2nd TV and then write it in the space below.

2nd TV Brand: __________________

5. SETUP When your TV turns OFF,

press and release SETUP to lock in the code for your TV. Your One For All Access 4 is now programmed to operate your TV.