Advanced Features
Shifted Macros
You can also program your ONE FOR ALL 6 to issue a sequence of commands by pressing the Magic key followed by another key. This allows you to maintain the original function of this key in every mode. You can install a Shifted Macro on any key, except for the device keys (TV, VCR, SAT, CD, AUD and DVD), the MAGIC key, the HOME THEATER key and the NUMBER keys.
If for example, you want to program a shifted Macro on the power key, simply press MAGIC once then POWER during step 3 (see page 30).
Now everytime you press Magic, then POWER, the ONE FOR ALL will turn off your TV, VCR or Satellite.
• To install any Shifted Macros, press:
MAGIC* + 9 9 5 + MAGIC + Key to which sequence will be assigned + Sequence of commands + MAGIC*
• To erase any Shifted Macro, press:
MAGIC* + 9 9 5 + MAGIC + Key to be cleared + MAGIC*
*Here you must hold down MAGIC until the device key blinks twice.
Notes:
-Make sure that you program a Macro on a spare key that you don’t use in any mode
-Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV, VCR, SAT, CD, AUD or DVD) you are using.
-To avoid accidental recordings with the ONE FOR ALL 6, you must press the Record key twice to begin recording. Because of this, you cannot assign a Macro or Shifted Macro to the Record key (for example the Record key).
-If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in macro on your ONE FOR ALL remote.
-If a Shifted Macro is placed on the Mute, Channel and Volume keys then Scan and Colour/Brightness will be sacrificed.
WWW.ONEFORALL.COM | 29 |