Advanced Features, Colour and Brightness

Advanced Features

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television.

Colour (+)	= Press and release MAGIC	then hold Volume (+)
Colour (-)	= Press and release MAGIC	then hold Volume (-)
Brightness (+) = Press and release MAGIC		then hold Channel (+)
Brightness (-)	= Press and release MAGIC	then hold Channel (-)

Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC.

Volume Punch-Through

You may be able to use some features of your Television and Video Recorder at the same time. If you're watching a programme on your Video, you can adjust the volume (a TV function) without first pressing the TV key. The chart below lists some of the possibilities:

Last Key Pressed:		You Can Control:

VCR		TV volume up and down, mute
AUX		TV volume up and down, mute

To punch through to TV Volume while in VCR mode press
MAGIC* 9 9 3	TV key.
To cancel the ”Volume Punch Trough”
Press MAGIC*	9 9 3	Volume(+) (the red light will blink four times)

*Here you must hold down MAGIC until the red light key blinks twice.

Auto Scan

Your ONE FOR ALL 3 comes with a special Auto Scan function which lets you “scan” through every programme available on your device.

For example, to scan the programmes on your TV:

1Aim the ONE FOR ALL 3 at your TV. Press the TV key. Press and release MAGIC then press the MUTE key.

The ONE FOR ALL 3 will send the command to advance through all the programmes available on your Television stopping at each programme for about three seconds. Remember, you must aim the ONE FOR ALL at your device the entire time you are using Auto scan.

2When you find a programme you would like to watch, simply press any key on the ONE FOR ALL key pad to stop the Auto Scan feature.

Important notes: Auto Scan may not work with devices that did not have programme +/- keys on the original remote control.