One for All URC-7740 instruction manual Setting up the ONE for ALL, Direct code set-up

Setting up the ONE FOR ALL 4

(How to set-up the ONE FOR ALL 4 to control your devices)

Direct code set-up

Example: To set up the ONE FOR ALL 4 for your television:

1.

Make sure your device (television) you wish to operate is switched on (not in standby).

2.

3.

4.

5.

6.

		OR
	EF
	ON
	09			63,04
	00		093,03
cura	0087,0216
	0217,0
Admiral	0264
Adyson	0516			37,
zi
Aga		0087 009,00
AGB		0216,0274		371
Agef		0037,0
Aiko		0361,0208,0

__ __

Find the code for your device in the Code List (page 73 - 85). The device codes are listed per device type and brand name. Also the most popular code for each brand is listed first. If your brand is not listed at all, try the Search Method on page 7.

Press the device mode key (TV) on the ONE FOR ALL 4 remote for the device you wish to set up.

Press and hold down MAGIC until the red light blinks twice (the red light will blink once then twice).

Enter your four-digit device code using the num-

ber keys. The red light will blink twice.

Now aim the ONE FOR ALL 4 remote at your

device (television) and press POWER. If your device switched off, the ONE FOR ALL 4 is ready to operate your device.

-Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key or the “TV-text off” key to switch your TV back on.

-If your device does not respond, follow steps 1 through 6 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all.

-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.

-If the original remote control from your Video Recorder / DVD player did not have a POWER key, press PLAY instead of POWER during step 6.

-To set up your other devices, follow the same instructions above, only press the appropriate device key during step 3.

-Remember to press the correct device key before operating your device. Only one device can be assigned to a device key.

-Write your device code in the applicable four digit boxes provided in the battery compartment and on page 8 for future reference.

Devices can be found under the following keys:

Video Recorder

Television	Satellite Receiver
	Cable Box
	DVD Player

To set up for a second TV, VCR, DVD or SAT (See mode re-assignment, Page 9).

6 WWW.O NEFORALL.CO M