JVC HD-52G566, HD-52G586, HD-52G576 manual Auto Clock Set, Manual Clock Set

Quick Setup Plug-In Menu

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal:

SET CLOCK

MODE	AUTO
TIME	-- : -- --
TIME ZONE	ATLANTIC
D.S.T.	ON
	NEXT
SELECT OPERATE	MENU EXIT

Notes:

è To choose AUTO

†To TIME ZONE

è To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii)

†To move to D.S.T. (Daylight Savings Time)

è To turn D.S.T. ON or OFF

†To NEXT (To Auto Tuner Setup)

•D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.

•Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October.

•You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above.

SET CLOCK

MODE		MANUAL
TIME		-- : -- --
TIME ZONE		ATLANTIC
D.S.T.		ON
	START CLOCK
SELECT	OPERATE	MENU EXIT

Note:

è To choose MANUAL

†To TIME

è To set the hour

†To minute

è To set the minute

†To Start Clock

•You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

(To be continued...)

25