Initial Setup
Set Lock Code
Channel guard and
Press the MENU button
π† To SET LOCK CODE
è To operate (lock icon appears)
Press ZERO to access the lock code
The first digit will be highlighted
è To select the number
SET LOCK CODE
LOCK CODE | 0000 |
PRESS OK TO FINISH
SELECT OPERATE | MENU EXIT |
π† To move to the next digit
Continue to follow these directions for all four numbers
Press the OK button to finish (your lock code is now set)
Press the Menu button when finished
When a viewer attempts to watch a blocked channel, this message appears:
THIS PROGRAMMING EXCEEDS YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.
NO. - - - -
The channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code).
Notes:
•After a power interruption you must reset the lock code.
•Write your lock code number down and keep it hidden from potential viewers.
•If you forget the lock code, a new code may be set using the steps listed above.
49