Installation
1.Some “DVB-T receivers” or “Digital TV’s” are able to supply your SV-9350 DVB-T (Freeview) Outdoor Antenna with POWER (5 VDC/40mA ). You may have to enable this - please refer to the manual of your DVB-T Receiver or Digital TV.
If your DVB-T receiver can supply the antenna with 5 VDC/40mA from the F/IEC connector, then please continue with step 2. Otherwise:
Use the included Power inserter for powering the SV-9350 DVB-T Outdoor Antenna.
➤Connect the Power inserter to your DVB-T Receiver or Digital TV Set.
➤Connect the AC Adapter plug to the DC input jack of the Power inserter.
➤Connect the AC Adapter to the mains.
2.Connect the SV-9350 DVB-T Outdoor Antenna with coaxial cable to your DVB-T Receiver or Digital TV Set by using the included accessories:
-coaxial cable
-F connector for connecting to SV-9350 DVB-T Outdoor Antenna
-F/IEC connector for connecting to DVB-T Receiver, Digital TV or Power inserter.
3.Place the SV-9350 DVB-T Outdoor Antenna as high as possible for best performance (allowed by 6m coax cable).
Note: - Big power consuming devices may be sources of interference (e.g. air conditioner, elevator, hair dryer and microwave oven etc.).
-It is advisable to place the SV-9350 DVB-T Outdoor Antenna as high as possible to prevent interception between the SV-9350 DVB-T Outdoor Antenna and the DVB-T signal source.
4.Adjust the orientation of the SV-9350 DVB-T Outdoor Antenna for best performance before fixing it to the wall / pole.