Fisher LNS-W31A, LNS-T31A, LNS-T32 manual Correcting the focus, Mount the Lens

Page 8

4

MOUNT THE LENS

1.Remove protective caps (front and back) on the optional lens.

2.Mount the lens on the lens attachment with 4 Screws.

3.Connect the lens motor lead connector to the socket on the lens attachment. (Motor Driven Lens only.)

4.Grasp the Lens Lock Lever and turn it fully upward. Install the Lens into the projector. Turn the Lens Lock Lever fully downward until lever is Locked (clicked position) properly.

When installing the Motor Driven Lens, be sure to mount Lens Motor on left-side. After installing the lens, make sure the Lens is not loose and properly installed.

 

 

LENS LOCK LEVER

 

LENS

 

 

ATTACHMENT

 

SPACER

B

 

 

A

 

 

C

 

 

D

 

DRIVER

A~D

 

Insertion position

SCREW

IN THE LENS

of the focus

Part No. (610 275 6029)

correction spacers.

 

Refer to following.

 

 

 

LENS ATTACHMENT

SOCKET

CONNECTOR

Correcting the focus

When the lens is attached to the projector and images are being projected onto the screen, the peripheral focus may be out of focus in some localized areas. If this happens, insert the spacer in between the lens attachment and the lens to correct the focus.

Inserting the spacers corrects the distance for best diagonal focus at the screen.

The corrected distance is determined by the thickness of the spacers that are used. As a guide, the distance is adjusted by approximately 30 mm for each 0.1-mm thickness of the spacers.

There are three types of spacers provided, and there are four of each spacer type. Use these spacers to correct the distance as required.

Push the Lens Lock Lever fully downward until it is locked (clicked).

LENS MOTOR

LEAD

LENS LOCK LEVER

Screen

 

 

B

D

Screen

 

 

40-inch projection

A

C

Insert spacers in

Distance

 

the location A~D

 

(above figure)

 

 

corresponding to

 

 

the screen location

 

 

A~D.

 

Spacer "1"

Correction distance

 

Color; Clear

30 mm/for 40-inch

 

Thickness; 0.1 mm

projection

 

 

 

 

Spacer "2"

Correction distance

 

Color; Black

55 mm/for 40-inch

 

Thickness; 0.2 mm

projection

 

 

 

 

Spacer "1"

Correction distance

 

Color; Cream

80 mm/for 40-inch

 

Thickness; 0.3 mm

projection

 

 

 

- 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Lens Replacement Procedure Parts ListLens Replacement Procedure for a Type Lens Motor Parts NO. Located on the LensMount the LIGHT-BLOCK Sheet Base Mount the LIGHT-BLOCK SheetLens Replacement Procedure for B Type Remove the Lens Cover and Front CabinetLens Lock Latches Fig-6 Fig-7 Remove the Lens Lens Replacement Procedure for C TypeRemove the LIGHT-BLOCK Sheet Base and LIGHT-BLOCK Sheet Correcting the focus Mount the LensMount the LIGHT-BLOCK Sheet and LIGHT-BLOCK Sheet Base Mount the Front Cabinet and Lens Coverレンズ交換作業手順書 遮光プレートベースを外す。（図 3、4 参照） レンズ交換は の手順で行います。レンズカバー及び遮光プレートを外す。 （図 1、2 参照） レンズを外す。（図 5、6 参照） レンズを取り付ける。（図 5、6 参照）遮光プレートベースを取り付ける。（図 7 参照） 遮光プレートベース 遮光プレート及びレンズカバーを取り付ける。 （図 8 参照）レンズカバー及び前面キャビネットを外す。 （図 1ー 1、２ 参照）（図 1ー２、２ 参照） （図 1ー３、２ 参照）レンズを外す。（図 3、4 参照） レンズを取り付ける。（図 5 参照）遮光プレート及び遮光プレートベースを取り付 ける。（図 6 参照） 前面キャビネット及びレンズカバーを取り付け る。（図 6、7 参照）レンズカバー及び前面キャビネットを外します。 レンズを外します。周辺フォーカスの補正 レンズを取り付けます。遮光プレート及び遮光プレートベースを取り付 けます。 前面キャビネット及びレンズカバーを取り付け ます。

LNS-T32, LNS-W31A, LNS-T31A specifications

The Fisher LNS-T31A, LNS-W31A, and LNS-T32 are innovative advanced technologies in the realm of linear actuators designed for various applications. These models are engineered to deliver precision, reliability, and performance in demanding industrial settings.

The LNS-T31A is notable for its robust construction and efficient operation. It features an all-weather design, ensuring that it performs optimally in harsh conditions. This model incorporates advanced servo motor technology which allows for precise positioning and smooth operation. Its compact size and lightweight structure make it versatile, enabling it to be installed in a variety of spaces without sacrificing power or performance.

The LNS-W31A stands out for its enhanced torque capabilities, making it ideal for tasks requiring significant lifting strength. Its intelligent control system utilizes advanced algorithms that monitor performance in real-time, ensuring that the actuator operates within its defined parameters. Moreover, this model offers various connectivity options, such as CANBus and Ethernet, which facilitate integration into existing automated systems and enable remote monitoring.

On the other hand, the LNS-T32 offers a unique combination of speed and efficiency, tailored for rapid-response applications. It features a high-speed motor combined with a sophisticated gear system that maximizes output while minimizing energy consumption. This model is particularly advantageous in applications where quick adjustments or movements are essential.

All three actuators share several common characteristics, including a high degree of accuracy, low maintenance requirements, and longevity. They are equipped with advanced feedback systems that provide real-time data on performance, allowing for proactive maintenance and minimizing downtime.

The materials used in their construction ensure durability, while compatibility with various control systems enhances their flexibility. In addition, these actuators comply with international standards for safety and efficiency, making them suitable for diverse industries including automotive, aerospace, and manufacturing.

In conclusion, the Fisher LNS series, represented by the LNS-T31A, LNS-W31A, and LNS-T32, exemplifies cutting-edge technology in actuator design. Each model brings unique features tailored to distinct applications, while their common traits ensure they meet the needs of industrial users seeking reliability and high performance. These actuators are designed to thrive in challenging environments, making them excellent choices for businesses looking to enhance productivity and efficiency.
Top Page Image Contents