To decrease the sharpness and to increase

Using Your Projector

VERTICAL POSITION—Pressto adjust the vertical position of the image down and to adjust the vertical position of the image up.

FREQUENCY—Change the display data clock frequency to match the frequency of your computer graphics card. If you see a vertical flickering bar, use Frequency control to minimize the bars. This is a coarse adjustment.

the left and

HORIZONTAL POSITION—Press

to adjust the horizontal position of the image to to adjust the horizontal position of the image to the right.

WHITE INTENSITY—Setting 0 to maximize the color reproduction and 10 to maximize the brightness.

DEGAMMA—Adjust among the 4 preset values to change the color performance of the display.

to digitally magnify an image to 10 times on the projection screen to reduce the zoomed image.

ZOOM—Press and press

VIDEO MODE—Select a mode to optimize the display on how the projector is being used: PC, MOVIE, sRGB (provides more accurate color representation), GAME , and CUSTOM (set your preferred settings). If you adjust the settings for White Intensity or Degamma, the projector automatically switches to CUSTOM.

SIGNAL TYPE—Manually select signal type RGB, YCbCr, YPbPr.

TINT—Pressto increase the amount of green in the image and increase the amount of red in the image.

DISPLAY (in PC Mode)

SHARPNESS—Press

sharpness.

SATURATION—Adjust a video source from black and white to fully saturated color. Press to decrease the amount of color in the image and to increase the amount of color in the image.

Dell 2400MP manual To decrease the sharpness and to increase

to decrease the sharpness and to increase the