BenQ PB8253 user manual Display menu

Page 43

Display menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION

DESCRIPTION

(default setting /

value)

 

Keystone

Corrects any keystoning of the image. See "Correcting keystone" on page

(0)

34 for details.

 

 

 

Brightness

Adjusts the brightness of the image. See "Adjusting brightness" on page

(0)

36 for details.

 

 

 

Contrast

Adjusts the degree of difference between dark and light in the image. See

(0)

"Adjusting contrast" on page 36 for details.

 

 

 

Phase

This function allows you to adjust the clock

phase to reduce image distortion.

(depends on the

 

selected input

 

source)

 

 

 

H Size

Adjusts the horizontal width of the image.

(0)

 

 

 

Lamp Hour

Displays the number of hours the lamp has been used.

 

 

Color

Increases or decreases the color intensity of the image.

(0)

 

 

 

Tint

Adjusts the color tones of the image. The higher the value, the more

reddish the image becomes. The lower the value, the more greenish the

(0)

image becomes.

 

 

 

Operation 43

Image 43
Contents Welcome Disclaimer CopyrightTable of contents Temperature information Safety Instructions Important safety instructionsSafety Instructions Allow at least 50 cm clearance from walls Locations near fire alarmsLocations with an ambient temperature Bedding or any other soft surfaceSafety Instructions Introduction Projector featuresIntroduction Shipping contents Lower view Projector exterior viewFront/upper side Rear/side viewConnector panel Projector Controls and functionsRemote control Mode LED indicator lightVolume + PIP POSCeiling front Floor front Remote control effective rangeRemote control batteries Ceiling rearChoosing a location Positioning your projectorSafety instructions for ceiling mounting of the projector Obtaining a preferred projected image size Page 1500 Maximum zoom Minimum zoomScreen Center of lens Projection distance 1219Connecting a computer Connecting a computer or monitorConnection Connection With a VGA cable With a VGA to DVI-A cable Connecting a monitorVGA to DVI-A Better video quality Connecting Video source devicesConnecting Audio Best video qualityMute on page 45 for details Connecting a DVI source deviceConnecting a Component Video source device Connecting an S-Video source device Connecting a composite Video source device Operation Power onStart up Adjusting the projected image Switching input signalAdjusting the projection angle Searching for details on the image Auto-adjusting the imageFine-tuning the image size and clarity Any problems?Scales an image so that it is displayed in the center Selecting the aspect ratioCorrecting keystone Optimizing the imageFor example PC/DVI-A Signal Input Selecting a preset modeYPbPr/YCbCr/DVI-D/S-Video/Video Signal Input Selecting a color temperature Other adjustmentsAdjusting brightness Adjusting contrastPersonalizing the projector menu display Operating in a high altitude environmentFreezing the image Using the laser pointer in the presentationHiding the image Remote paging operationsPIP Picture In Picture operation Operation on the remote controlOperation in the OSD menus Shutting down the projector OSD menu system On-Screen Display OSD menu operationPressing Left/ Right on the projector or remote control Using the menusDisplay menu Display menu Image menu Treble VolumeSource menu MirrorControl menu PIP menu Care of the projector MaintenanceRear filter Front filter11, and the other is on the left side see item 16 on Lamp information Use and replacement of the lampReplacing the lamp Temperature information Projector is under normal operation IndicatorsStand-by mode IllustrationPower Temp Lamp Thermal events No picture TroubleshootingRemote control does not work Projector does not turn onRemote mouse function does not work Projector specifications SpecificationsSupported timing for PC including DVI-I input DimensionsTiming chart Horizontal Vertical Pixel Resolution Frequency Mode KHz MHzSupported timing for Component-YPbPrinput Signal Format Horizontal Frequency Vertical Frequency KHzSupported timing for Video and S-Video inputs Limited Warranty WarrantyMIC statement Regulation StatementsFCC statement EEC statement