BOXLIGHT CD-850m manual Connecting a video device, Standard video connections

Page 12

Connecting a video device

connect video cable

Standard video connections

Plug the video cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yellow Video con- nector on the projector.

Plug a white connector into the left audio out connector on the video device and plug a red connector into the right audio out connector on the video device.

Plug the remaining white connector into the left audio in connector on the projector, and plug the red connector into the right audio in connector on the projector.

Connect the black power cable to the connector on the back of the projector

 

 

 

and to your electrical outlet. The Power LED on the keypad turns solid

 

computer in

serial control

 

 

 

monitor network

green.

connect power cable

 

 

 

 

 

NOTE: Always use the power cable that shipped with the projector.

Optional video connections

If the video device uses a round, four-prong S-video connector, plug an

connect S-video and video cables

S-video cable (sold separately) into the S-video connector on the video

 

 

 

device and into the S-videoconnector on the projector. Use the video cable’s

 

 

 

audio connectors as described directly above (the yellow connectors on the

 

 

 

video cable are not used).

 

 

 

monitor network

computer in

serial control

If the video device uses component cable connectors (sold separately), plug the cable’s green connectors into the green component-out connector on the video device and into the green component connector (labeled “Y”) on the projector. Plug the component cable’s blue connectors into the blue compo- nent-out connector on the video device and into the blue component con- nector (labeled “Pb”) on the projector. Plug the component cable’s red connectors into the red component-out connector on the video device and into the red component connector (labeled “Pr”) on the projector. Use the video cable’s audio connectors as described directly above (the yellow con- nectors on the video cable are not used).

connect component cables and video cables

11

Image 12
Contents User’s Guide Safety Certifications Remote Control WarningDeclaration of Conformity TrademarksTable of Contents Introduction Included itemsCables Projector components and features Connecting a computer Required computer connectionsOptional computer connections Connect RS-232 cable Displaying a computer image ? No startup screen? Get help onFirst-time projector use with Windows Skip this page if you did not connect a USB mouse cable For WindowsWizard launches three times For Windows 2000, Windows ME, and Windows XPAdjusting the image Connecting a video device Standard video connectionsOptional video connections Displaying a video image Contrast Troubleshooting your setup Shutting down the projectorSource troubleshooting Only startup screen appearsRange Out Page Projector troubleshooting Page Color Lamp won’t turn on, LED blinking redLamp must be replaced Lamp turns on Using the keypad buttons Regarding this projectorUsing the remote control Troubleshooting the remoteUsing the audio Troubleshooting audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Screen Save Service Maintenance Cleaning the lensReplacing the projection lamp Resetting the lamp timer Using the security lock Specifications AccessoriesAppendix Optional Accessories Projected image sizeImage Width Feet/mNumerics USBLED XGA Limited Warranty Boxlight