Avenview SPLIT-HDSDI-6 specifications Before Installation, Panel Description

1.7Before Installation

∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.

1.8Panel Description

FRONT PANEL

1.	HD/SD-SDI Input	2.	LED – Reserved
3.	LED – Power Indicator	4.	5V DC Power Jack

REAR PANEL

5.	HD/SD-SDI Output 1	6.	HD/SD-SDI Output 2
7.	HD/SD-SDI Output 3	8.	HD/SD-SDI Output 4

Bottom Panel

These DIP switches are reserved for the SPLIT-HDSDI-6-RS or SPLIT-HDSDI-6-RS that has re-clocking functionalities.

No use for this model.

www.avenview.com 5