Avenview C-COMPVGA-HDM specifications Installation

1.8Installation

To setup Avenview C-COMPVGA-HDM follow these steps for connecting to a device:

1.Power off display source such as DVD Player, Set-top box, PC etc.

2.Connect VGA or Component source to the video input

3.Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack

4.Connect VGA/Component Adapter to VGA or Component input of the device

5.Connect HDMI cable to device and TV or projector

6.Plug in 5V DC power cord to power jack of C-HDM-COMPVGA

7.Power on C-COMPVGA-HDM converter

8.Power on VGA / Component source and display with HDMI input.

S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF receiver must be able to recognize the input S/PDIF format. C-HDM-DVIA only separates the digital audio in HDMI stream and bypasses this decoded audio to the output.

This version does NOT support 8 Channel analog audio applications

S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only supports 48 KHz audio sample rate.

www.avenview.com 8