Atlona AT-WHD200 Wireless Hdmi Transmitter Rear Panel, Wireless Hdmi Receiver Front Panel

6.2 Wireless HDMI Transmitter Rear Panel

1.+5V – Power jack for plugging the adaptor from the power source.

2.HDMI 1 In – Plug with HDMI cable from the input source device.

3.HDMI 2 In – Plug with HDMI cable from the input source device.

4.Component In – Plug with component video cable from the input source device.

5.Audio In – Plug with 3.5mm phone jack audio cable from the input source device.

6.Blaster – Plug with IR Blaster cable for remote control the source devices with existing controller. (Optional, excluded in this model)

7.RS-232 – This function is for manufacturing use only.

6.3 Wireless HDMI Receiver Front Panel

1.IR – IR receiver for remote signal to control the input source equipment.

2.Power LED – Blue LED illuminate when the device is power on.

3.Link LED –Red LED illuminate when HDMI receiver link up with Wireless HDMI transmitter.

4.Video – Green LED illuminate when input source signal is received and send to display.

5.Power SW – Power switch for power on the device and power off.