Daewoo DSD-9502T manual Important care and safety advice, Electrical warning, Positioning the PVR

Page 3

DSD-9502T 2006.9.13 2:16 PM ˘ ` 2 mac001 1200DPI 90LPI

Important care and safety advice

This Digital PVR has been manufactured to meet international safety standards, but you must take care to operate it safely.

It is important that you read these safety instructions.

If you have any doubts about the installation, operation, or safety of this Digital PVR, contact Daewoo, as shown in the next page.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Electrical warning

Your Digital PVR contains a high voltage which is sufficient to cause a dangerous electric shock.

Never remove the Digital PVR cover.

There are no user-serviceable parts inside.

Switch off the power supply from the mains wall socket. before you disconnect any equipment from the Digital PVR.

Never push anything into holes, slots or other openings in the case.

Positioning the PVR

The Digital PVR and cables should be placed so that they not likely to be walked on or pinched by items placed upon or against them.

Do not expose your Digital PVR to direct sunlight or to extreme temperatures (above

40°C or below -5°C), high moisture levels or dust.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

The ventilation should not be impeded by covering the ventilation openings with items,such as newspapers,table-cloths,curtains,etc.

Do not Place the Digital PVR on an unstable surface or on a bed, sofa, rug, or similar surface as this may block air ventilation and cause it to overheat.

Never place the Digital PVR over a radiator or in an unventilated cabinet. No naked flame sources, such as candles, should be placed on the apparatus.

2

Image 3
Contents USER’S Guide Introduction Positioning the PVR Important care and safety adviceIt is important that you read these safety instructions Electrical warningEnd User licence CleaningUnplug when not in use Carefully unplug the Digital PVR from the electrical outletPackage contents Table of ContentsFront Panel Rear Panel Audio L/RV Scart Number buttons Remote ControlConnect the Scart cable Connecting the PVROption 1 connecting to a TV only Connect your aerial to the Digital PVROption 2 connecting to a TV and VCR Connect the Power cable Switch on your TVYou are now ready to tune in to the digital TV service Using your Digital PVR for the first time Installation wizardBasic Operation Now and Next Information Using the TV Guide EPGTime Shifted Recording TSR Switching channels in the PIP screenPIP and T ime Shifted Recording Picture-in-Picture PIP ScreenFast Forward to the Next Scene PauseSlow Fast Rewind to Previous SceneInstant Recording Recording and PlaybackTimer Programming the PVR to recordEditing the Recording Schedule Programme playback from recording library Programme PlaybackUsing the Main & Setup Menu’s Recording TimersRecording Recording library Recording Guide search Recording Recording configurationProgramme guide Setup Favourites Setup Channel listSetup Language Setup ConfigurationInstallation For general problems contact Where to get more helpSpecification Disposal of Used Electrical &Electronic Equipment