DigiTech MP 600-9000 DVI manual 5 DVI/USB extender, Earthing screw

Page 42

3.3.5DVI/USB extender

Using a DVI/USB extender allows the MP to be connected to the computer over greater distances. A maximum distance of 5m is possible with standard cables.

The USB/DVI-TX transmission unit is connected to the computer, the receiver unit is located in the MP device.

For details please see the separate manual.

3.3.6Earthing screw

The device has to be earthed with a separate earthing cable (min. 2.5 mm2) via the earthing screw. The cable should be as short as possible.

Required nuts and washers are mounted on the ground bolt of the housing by the factory.

Structure of the screwed connection on the housing:

Illustration 7

Earth terminal

Important!

Observe that the nut at least is tightened

in a hand-tight manner after the connection with the earthing cable.

40

Image 42 Contents
Gerätehandbuch Hardware Manual Einbau Monitor mit TFT-DisplayPage Gerätebeschreibung Zu diesem HandbuchWichtige Hinweise Montage, Einbau und WartungAbbildungsverzeichnis Abkürzungen Zu diesem HandbuchStatus Wichtig! Bitte lesen Sie dieses HandbuchZitierte Normen Wichtige Hinweise Beachten Sie unbedingt Kapitel 2.1 Technische DatenGrundgerät Technische DatenGerätetyp Alle Angaben ohne GewährGerätebeschreibung Allgemeines HinweisMonitor-Panel Typ Display Auflösung VESA-StandardStatus-LEDs Bedienelemente der Frontplatten1 MP600/ MP1000/ MP1000s/ MP2000/ MP5000/ MP9000 Touch Funktionstasten2 MP5020 Touch plus F-/S-Tasten Alpha-Taste 4 MP5070 Touch plus Num-, Sonder-, F-Tasten und MF2 Option frontseitige USB-Buchse Versorgungs-Spannungsanschluss SignalAnschlüsse des Monitor-Panels USB in upstreamUSB out downstream DVI AnschlussMaximale Strombelastung pro Anschluss 500mA 5 DVI/USB-Extender ErdungsschraubeWichtig Montage, Einbau und Wartung Die Geräte nur als Einbaugeräte verwendenMontage des Monitor-Panel Montage mit Schraubspannern Einbauausschnitte des Monitor-Panel Bedienung und Reinigung des Touchscreens Pflege-HinweisAbmaße und Einbauraum Abmaße der Monitor-PanelErsatzteile und Zubehör Bestell-Nr ErsatzteilPage Contents List of figures About this manual AbbreviationsImportant! Please read this manual Cited standards Please read these instructions before using the device Important notesDevice type Technical dataAll information provided without warranty Basic deviceDevice description General Type Display Resolution Vesa standard Monitor panelFunction keys Operational control of the front panelsStatus LEDs F1 / Tool2 MP5020 Touch plus F-/S-keys Alpha key 4 MP5070 Touch plus Num-, special keys, F-keys and MF2 Front panel USB socket option Connections of the monitor panel Supply voltage connection24V DC supply voltage DVI connection Maximum current load per connection 500mA5 DVI/USB extender Earthing screwMounting, installation and maintenance Only use the devices as built-in unitsMounting the monitor panel Mounting with screw clamping fixtures Mounting cutouts of the monitor panel Operation and cleaning of the touchscreen Maintenance noteDimensions and mounting space Dimensions of the monitor panelsSpare parts and accessories Order no Spare partPage Page Lenze Digitec Controls GmbH