EverFocus 410H, EDR810H, 410M, 810M instruction manual Lower, REC Speed on Time Zone

(5)REC QUALITY: Select an image quality for recording. Normal record image quality and event record image quality can be set individually. There are six different qualities available. A higher image quality needs more HDD space. The theory space needed per second lists below:

ESTIMATE BIT SIZE

SUPERIOR	:	4.0 Mega Bits/sec
HIGH	:	3.5 Mega Bits/sec
STANDARD	:	3.0 Mega Bits/sec
BASIC	:	2.5 Mega Bits/sec
LOW	:	2.0 Mega Bits/sec
LOWER	:	1.5 Mega Bits/sec

Since Variable Bit Rate (VBR) might be used, therefore this table is for your reference only.

(6) REC SPEED ON TIME ZONE:

TP : Scheduled recording time 1~8 which can be set in the SCHEDULE SETUP MENU.

“N” in the column of “TP”is the normal recording time.

NORMAL: Normal record speed (Images per second) up to 30 IPS. EDR810/410 will adjust

to the maximum recording speed by calculating the total installed cameras that

have enabled in the CAMERA SETUP MENU.

EVENT : Event record speed (Images per second) up to 30 IPS or “OFF”.

Note: In order to validate a new record speed, you need to disable all record actions before

setting up.

SET : Set “ON” when using schedule recording.

Set “OFF” when not using schedule recording.

Note: The status of SET can only be changed in the SCHEDULE SETUP MENU.

33