Scheduled Events (Timers)
Creating Timers from the IPG (cont)
DVR Timers can be set by a special
Manually Creating and Modifying Timers from the Options Menu.
To create Timers with advanced options or to modify and cancel existing Timers, access the Timers menu. Press the OPTIONS key on the remote control, then select Timers (option 5) and the menu will appear. You will see any existing timers listed followed by a line reading “Press Enter to create event timer”. To create a new Timer, highlight this line and press ENTER on the remote control. To modify or delete an existing Timer, highlight the appropriate line instead. The Event Timer screen will appear.
The following options are set when creating or modifying a Timer:
Timer Type: Select
Frequency: Select Once for a
Start Time: Set to the time at which your program begins or the time you would like the
End Time: For a DVR Timer, the end time should be the time when recording should stop, for
23