Clover Electronics CDR 0440 manual Alarm-Out, PTZ Setup

2-4-1. ALARM-OUT

	Figure 2.4.2. ALARM-OUT setup screen
	Table 2.4.2. Menu item in ALARM-OUT Setup screen
Item	Description
ALARM OUT	Select an alarm out number.
	Available NO: 4CH(1), 9CH(1), 16CH(1)
SENSOR IN	Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.
MOTION ON	Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.
VIDEO LOSS ON	Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.
ALARM DURATION	Set the alarm dwell time from 5 to 60 seconds.
ERROR ALARM	Set the error type for the alarm activation. The options are
	OFF, ALL, HDD ERROR and VIDEO LOSS.

2-4-2 PTZ Setup

To control the PTZ functions of the camera, connect a controller to the RS-485 port.

Connect the RS-485 cables of PTZ camera to the RS-485 port on the rear panel.

Press SEL button or double click to enter the menu. Then PTZ menu screen is displayed. 28