AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
MP3016 Video card | MP2016 Video card |
AVerMedia User’s Manual
EYES Pro/MP2016/MP3000/MP5000
1.6 Connecting the AVerMedia Video Cards
Up to four cameras can be connected to each AVerMedia video card - one camera per BNC terminal.
Infrared Sensor
Proximity Sensor
Sensor Inputs
Smoke Detector
Reed Switch
Relay Control Relay OutputsBurglar Alarm
Access Control Lock
1.7 Attaching Cameras
Connector Cable
(Optional)
Camera 1
Camera 2
Camera 3
Camera 4
Coaxial Cable
(Not Supplied)
PCI Slot | NOTE: Orient the |
red mark upward. | |
Fig. 1 | Fig. 2 |
1.Remove the computer cover.
2.Remove the I/O brackets for the four PCI expansion slots. Save the screws.
3.Align AVerMedia video card connector with the available PCI slots.
4.Screw AVerMedia video card and the 3 daughter cards respectively into the rear panel with the screws. See the Fig.1.
5.Connect the 3 daughter cards to AVerMedia video card with ribbon cables. See the Fig.2.
6.Replace the computer cover and reconnect all cables.
Cameras must be attached to the BNC connectors of the server video cards in a specific order to avoid transmission problems. Video cards are stacked vertically into the chassis. If all four video cards are installed, the rear panel of the server will appear as shown in the diagrams below.
EYES Pro | MP2016/MP3000/MP5000 |
1 | 2 | 3 | 4 | 1 | 5 | 9 | 13 |
5 | 6 | 7 | 8 | 2 | 6 | 10 | 14 |
9 | 10 | 11 | 12 | 3 | 7 | 11 | 15 |
13 | 14 | 15 | 16 | 4 | 8 | 12 | 16 |
7 | 8 |