Bosch Appliances 700 operation manual Video signals, Recording status, Sensors

Page 59

Divar 700 Series

Operating instructions en 59

 

 

Earliest recording - displays date and time of the earliest (oldest) recording on disk.

Latest recording - displays date and time of the latest (newest) recording on disk.

Total Disk Size - displays the total installed disk space.

RAID status - displays enabled if the disks are used as a RAID array.

Time till overwrite appr. - estimated time video is retained until overwriting.

Authenticity check... - click to check authenticity of recorded audio and video.

Disks in active disk set:

The list shows which internal disks or LUNs on iSCSI arrays are available for recording in the active disk set.

The disk or LUN on which recording is currently performed or scheduled is shown with a red dot. Other disks or LUNs in the disk set which are available for recording are marked with a green dot.

When RAID is activated all 4 local drives show a red dot. iSCSI LUNs are not avail- able for recording when RAID is activated.

The active disk set is selected during boot if the unit detects multiple disk sets. The active disk set can also be changed in the Storage configuration pages.

Video signals

The video signals tab displays the system video mode (PAL or NTSC) and video input status.

Recording status

Currently active profile - displays current profile

Alarm recording at input - displays which inputs are in alarm recording mode Motion recording at input - displays which inputs are in motion recording mode

Current recording status - displays video and audio recording mode and status for each input

Sensors

Displays actual temperature and voltage sensor values. If temperature levels are outside of the normal range, the displayed values are yellow. If this occurs, check that the ambient temperature is within the recommended specifications and that there is proper air ventilation. If the temperature reaches a critical level, the unit automatically shuts down. To restart the unit, disconnect the power cord, wait for at least 30 seconds, and then reconnect the power cord.

Sensor name

Lower limit

Upper limit

 

 

 

Processor

5 °C / 41 °F

100 °C / 212 °F

 

 

 

Air inlet

5 °C / 41 °F

45 °C / 113 °F

 

 

 

Air outlet

5 °C / 41 °F

55 °C / 131 °F

 

 

 

Hard disk #1

5 °C / 41 °F

55 °C / 131 °F

 

 

 

Hard disk #2

5 °C / 41 °F

55 °C / 131 °F

 

 

 

Hard disk #3

5 °C / 41 °F

55 °C / 131 °F

 

 

 

Hard disk #4

5 °C / 41 °F

55 °C / 131 °F

 

 

 

Table 5.1 Temperature sensors

Bosch Security Systems

Installation and Operation manual

F.01U.246.471 v3.6 2011.11

Image 59
Contents Divar 700 Series Page Table of Contents Operating instructions Advanced configurationSnmp KBD Menu default values 106Technical specifications 114 Important safety instructions Safety precautionsEn Safety Divar 700 Series Coax grounding Important NoticesRack-mount FCC & Ices Information FCC and ULTrademarks Bosch noticesDisclaimer CopyrightNetwork Digital video recorder for surveillance applicationsVersions Model Analog A/V Monitor Dual mono IP channelsHybrid verions DHR Firmware upgradesSoftware 4ManualsOn-screen help 5FeaturesPackage contents UnpackingEn Introduction Divar 700 Series Associated equipment Installation environment1Connections Quick installNavigating First-time useInternational Quick install menu2Schedule Quick install menu Schedule2CIF Qvga Setting QVGA/VGA cameras 1080p/720p cameras3Recording CIF Qvga4Network Quick install menu NetworkMounting Desktop installationRack mounting Removing the front panel Hard disk installationMounting instructions Remounting the front panel Placing a hard disk4Camera connections SpecificationsMonitor connections Audio connections hybrid version only3Y/C Monitor streaming connection hybrid version2CVBS CTS Signal name Pin number DescriptionRS232 COM port connections RTSTermination Pin number SignalKeyboard connections 11RS485 port Ethernet connectionsGND Biphase portShield Ctrl BiphaseConnecting the alarm outputs 13USB connectorsExternal alarm I/O connection Connecting the inputsAlarm I/O 19 Malfunction relay output Malfunction relayLive 16Power supply17Maintenance Signal name Pin DescriptionArrow keys Front panel controls1Keys En Operating instructions Divar 700 Series 2Mouse Controls Indicators3Viewing Viewing picturesMonitor a Monitor B hybrid version onlyCameo assignment MultiscreenFull-screen SequenceLive and playback Live modeAccessing playback functions Playback modeExport ConfigurationOverview of the menu system SearchAccess using the Intuikey keyboard Access using the front panel keysAccess using the mouse Date/time search 6SearchEvents search criteria 2SearchSmart motion search criteria Select the input to search using Video inputSearch menu Text data Text search criteria10 Search menu Search results Search results1Export Export and local playback13 Local playback menu 2PlaybackMultiscreens 8ConfigurationMonitor settings Display options15 Configure monitors menu Sequence Event display 16 Configure monitors menu Event displayText display 17 Configure monitors menu Text displayStorage status System information1Status Version InfoSensor name Lower limit Upper limit Video signalsRecording status SensorsVolt 10.8 13.2 Voltage level Lower limit Upper limitLogbook results 2LogbookLogbook filter Background events 10.1AlarmsAcknowledging an alarm Event handling10.4 10.5 Video loss alarm10.2 Contact inputs 10.3 Motion eventsRecording Left tabs Top tabs InternationalVideo & Audio ScheduleSystem 1International1Language Left tabs Top tabs Users2Time/date Configuration menu International Time/dateTime Server Configuration menu International Time ServerGeneral tab Video & AudioAnalog Channels IP camera 2IP ChannelsControl tab Configuration menu Video & Audio IP camera manual setup Manual setupAuto detect Enable video inputCamera resolutions Enable SD display on local monitorStatus 3Bitrates tabDivar 700 Series Advanced configuration en Schedule Setting the dynamic characteristics3Exceptions 1Normal 4RecordingNo recording 2Contact3Text 4Motion5Copy Profile overrides 5ContactsRelay outputs Contact input propertiesNo override default Motion detection on analog cameras MotionEn Advanced configuration Divar 700 Series Motion detection on IP cameras 13 Configuration menu Motion on IP cameras2DirectIP Text data1Bridge 15 Configuration menu DirectIP text data 1General 8EventActions 3Motion4Text Copy Video loss9Network 1Setup General18 Configuration menu Network Setup Connection Setup Connection19 Configuration menu Network Setup Connections IP Range 20 Configuration menu Network IP range5Monitor Streaming 21 Configuration menu Network Monitor streamingSnmp 6SNMPTraps 23 Configuration menu Network Snmp TrapsSelection of active disk set 10Storage10.1 Disk set Use 10.2DisksAll disks 10.3Service10.4 Replacing a disk 10.5 Raid 4 protection Activating RAID modeWhen a hard disk drive fails Setting up a new disk11.1General 11.2Administrator11Users 11.3 Users 1 28 Configuration menu Users User 1 access rights29 Configuration menu Users User 1 control rights 12.2KBD 12.1Service12System RS485 port 12.3 Serial portsCOM port 12.5Logging Log contacts Log motion Log remote access12.4Licenses 4CIF Quick install menu defaultsNavigation Setting Default value Reset DD-MM-YYYYMonitor view settings defaults PTZ Configuration menu defaults4CIF Navigation Setting Default value Reset Enabled Auto DNS address Connection RTS/CTS Page Video Voltage and PowerAlarm Handling ElectricalUSB ConnectorsControl RCADisplay Modes MechanicalEnvironmental Video bitrates Kbps for IP HD cameras Electromagnetic and SafetyVideo bitrates Kbps for analog and IP SD cameras Accessories Optional Page Bosch Security Systems
Related manuals
Manual 32 pages 40.01 Kb Manual 32 pages 40.09 Kb Manual 82 pages 123 b

700 specifications

Bosch Appliances has long been synonymous with innovation and quality, and their 700 Series stands as a testament to this legacy. Designed to elevate the cooking experience, the Bosch Appliances 700 Series combines advanced technology with sleek aesthetics, making it a favored choice for modern kitchens.

One of the standout features of the 700 Series is its robust suite of cooking appliances, which includes wall ovens, cooktops, and microwaves. The wall ovens boast a European design that seamlessly fits into any kitchen decor. With a generous capacity, they allow for cooking large meals while ensuring even baking and roasting, thanks to the European Convection technology. This feature circulates hot air throughout the oven, ensuring perfectly cooked dishes every time.

The cooktops in the 700 Series are outfitted with precision burners, which provide instant heat adjustment, allowing for greater control and consistency in cooking. Whether you are simmering a delicate sauce or searing meat, the powerful burners provide the versatility needed for a wide range of culinary tasks. Bosch's induction cooktops also stand out for their energy efficiency and safety, as they heat cookware directly, leaving the surface cool to the touch.

Another notable characteristic of the 700 Series is its focus on smart technology. Many appliances in this series are equipped with Home Connect, which allows users to control their cooking experience remotely via a smartphone app. This feature enables you to preheat your oven or monitor cooking progress, ensuring convenience and flexibility in today’s fast-paced lifestyle.

The 700 Series also prioritizes ease of use and maintenance. The wall ovens come with self-cleaning options and easy-to-read LCD displays, simplifying the cooking process. Additionally, Bosch's attention to quiet operation means that you can enjoy your cooking experience without the distraction of unnecessary noise.

Overall, the Bosch Appliances 700 Series combines advanced technology, stylish design, and user-friendly features. Whether you're a home chef or a busy professional, this series offers the capabilities and elegance you need to elevate your culinary creations. With Bosch, you are not just buying an appliance; you are investing in a lifestyle of quality, efficiency, and innovation.