Record Mode, SD Card Status, Stop Record

OPERATION CONTINUED

(3) SD Card Status:

SD Card has not been inserted or is malfunctioning

SD Card is proceeding file testing

SD Card is functioning normally

Disk full and overwrite record

IMPORTANT

When SD card is not inserted, record and playback function is inapplicable, but monitoring is applicable.

RECORD MODE

1.START RECORD: 3 types of recording mode

Manual Record: Suitable to record anytime. Press Rec Button, to enter manual recording status (start recording). For more information, please refer to Record Setup.

Motion Detection Record: Suitable to record, when there are severe image changes. Motion detection triggers schedule recording, but it will only start recording when the variation exceeds the alarm limitation value. For more information refer to Record setup.

Continuous Record: Suitable on few constant frame recording or on long-term continuous recording. For more information, please refer to Record Setup.

2.STOP RECORD

Pressing the Stop button stops the manual recording only. By Entering Play or Menu schedule recording (Motion Detection and Continuous Record), every type of recording will be stopped. To continue recording, please follow the methods below to restart recording.

Manual Record	Repress REC button
Schedule Record	After exit playback or menu mode, whether the
Motion Detection	setup has been changed or not, the system will
	automatically re-check the record schedule
	setup again.

3.RECORD DISPLAY:

Indicates recording is in progress

Manual Record

Schedule Record

Motion Detection Record

2 0 0 4 / 0 2 / 0 1	0 8 : 1 0 : 0 3

w w w . s v a t . c o m

page 9