MENU SETTINGS
Main Menu Setting
| Main Menu |
> CAMERA SELECT | 1234 |
RECORD SELECT | 1234 |
RECORD MODE | EACH |
RECORD FRAMERATE | 30 |
VIDEO QUALITY | NORMAL |
RECORD SCHEDULE | Default setting 0~24 record. |
SUB MENU |
|
HARD DRIVE SETUP |
|
SENSOR SETUP
NETWORK SETUP
PRESS (< , >) THEN (SELECT)
PRESS (MENU) TO EXIT
Camera Select
1.When CAMERA SELECT option is selected, 4 different images from all cameras are initially displayed. (The default setting is 1234 all cameras on.)
2.Use the view button on the front panel to select the camera for
viewing on the TV screen. CH 1 (Camera 1), CH 2 (Camera 2), CH 3 (Camera 3), CH 4 (Camera 4).
3.You can also use the SELECT button for different combinations of camera viewing. For example,
a). When you choose
d). When you choose
*There are 16 different combinations of camera view for your choice.
Record Select
1.When you select RECORD SELECT , you may turn on or turn off the recording function of different channels (The default setting is 1234 all cameras on.).
2.The selected camera channel on RECORD SELECT menu is same as CAMERA SELECT options.
3.Please be reminded that only selected camera will record
Record Mode
1.There are two different record mode - EACH and QUAD to be selected.
2.When you set EACH mode, you can view each image display in a single full screen by using the button on front panel of the DVR.
3.When you set QUAD mode, you can see the images from the cameras in the quad screen which shows four sections on the single TV screen.