If the volume level of your external device is too high, it can cause some noise/distortion. Before recording, set
Connect the audio cable to micro- phone jack of the RipFlash Trio using the earphone connector(a) and connect the other head of audio cable to the earphone jack of the audio devices.
Press the REC button to start recording.
To pause recording, press the REC/
Pause button. To stop recording, press the
PLAY/STOP button.
Recording quality and timetable (based on 128MB)
|
|
| MIC |
|
|
| LINE- IN |
| ||
|
|
|
|
|
|
|
| |||
|
|
| MONO |
| MONO |
| STEREO | |||
|
|
|
|
|
|
|
|
|
|
|
LQ | 8 | Kbps |
| Max.2180 Min | 8 | Kbps |
| Max.2180Min | 96 Kbps | Max.180Min |
MQ | 16 | Kbps |
| Max.1090 Min | 16 | Kbps |
| Max.1090Min | 128 Kbps | Max.130Min |
HQ | 32 | Kbps |
| Max.540 Min | 32 | Kbps |
| Max.540Min | 160 Kbps | Max.100Min |
|
|
|
|
|
|
|
|
|
|
|
The sound quality is automatically set to MONO when the internal microphone is in use. Note the STEREO mode is only applicable with the external microphone or external
audio devices.
When recording from an external sound source, such as an audio devices, select STEREO/HQ mode for high quality recording soudn.
Note in this mode the recording time will be reduced.
18