Timer

Note: If timer recording is enabled then manual

recording is disabled; so if you have interrupted the timer recording to playback you simply press record and this reinitiates the timer record mode. This would effectively mean that manual record was disabled during timer record enable mode. Only timer would be active.

12. CLEAR HDD

Delete all the contents of your HDD. When you choose “YES” on this option, you will be prompted with the question shown : Press “►” to clear HDD or press ”◄” to confirm not to clear HDD.

13. SYSTEM RESET

Reset all system settings back to factory default settings.

14. REMOTE MODE

ALL DATA IN HDD

WILL BE CLEARED

ARE YOU SURE?

(◄ : NO ► : YES )

Set the remote mode for connection with computer via RS-232 or RS-485. (Please refer to page.17 for RS-232 Remote Protocol)

15. BAUD RATE

Set the remote protocol transmitting baud rate. Available Baud Rate are 115200, 57600, 19200, 9600, 4800, 3600, 2400 and 1200.

16. REMOTE PROTOCOL ID SETUP

To control different DVR by setting RS232 remote protocol. ID number can be set from 000 to 255.

1. DAY

Select the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedule the DVR to automatically record.

(MENU)

►TIMER RECORD CAMERA SYSTEM EVENT

NOTE : 1.Special Date could be changed by “Enter”, “Up” and “Down” buttons.

2.If you have selected the specific date and recording timer set from that specific day to a new day, then the Recording Timer Schedule will be set as whole week. For specific date of Recording Timer Schedule, it is not recommended to set End Time over 23:59. For Example:If you set Timer Schedule Day as Sunday, and START from 11:30, but End on 00:20, then Recording Timer Schedule is set as from every Sunday's 11:30 to next Sunday's 00:20. If you only want to set Recording Timer Schedule from every Sunday 11:30 to Monday 00:20, then you should set Recording Timer Schedule as Sunday from 11:30 to 23:59, and Monday from 00:00 to 00:20.

2. START

Select the starting time for the recording.

3. END

Select the finishing time for the recording.

4. QUALITY

Select the image quality for the recording. There are four Quality settings :

BEST, HIGH, NORMAL and BASIC.

(TIMER)

DAY START END QUALITY IPS DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A DAILY 00:00 00:00 BEST 25A TIMER ENABLE : YES

5. IPS

Stands for Images Per Second and it could let you see Record submenu for more details.

NTSC－25A、15、8、4、2、1

PAL－18A、12、6、3、2、1

NOTE : “A” means “ Record with Audio”.

6. TIMER ENABLE

Enables / disables Timer recording function