Maxtor 16 Channel Digital Video Recorder user manual Network Setup, WAN World Area Network

5. NETWORK SETUP

ADVANCED SETUP PAGE

1.ALARM SETUP

2.MOTION SETUP

3.RECORD SETUP

4.PASSWORD SETUP

5.NETWORK SETUP

6.HDD FORMAT

7.FACTORY DEFAULT

8.SOFTWARE UPDATE

1.SPEED : >512K / 512K / 256K / 128K / 64K

2.IP TYPE: OFF

>OFF (Close network function) / STATIC (LAN / WAN)

3. IP ADDR: 192.168.192.250 (Factory Default)

4. GATEWAY: 192.168.192.001 (Factory Default)

5. NETMASK: 255.255.255.000 (Factory Default)

6. DNS 1: xxx.xxx.xxx.xxx

7. DNS 2: xxx.xxx.xxx.xxx

-MAC ADDR

XX.XX.XX. Machine number, user cannot change.

TCP-IP SETUP PAGE

1.SPEED:

2.IP TYPE : OFF

3.IP ADDR: xxx.xxx.xxx.xxx

4.GATEWAY: xxx.xxx.xxx.xxx

5.NETMASK: xxx.xxx.xxx.xxx

6.D.N.S 1: xxx.xxx.xxx.xxx

7.D.N.S 2: xxx.xxx.xxx.xxx MAC ADDR: xx.xx.xx.xx.xx.xx

Press direction buttons up/down/left/right to TCP-IP items position.

Press values change button to change values.

>Network Requirement: DVR can not go through IP sharing device, only HUB. LAN (Local Area Network)

1)DVR side input local IP address such as 192.168.192.5, or use the factory default IP.

2)After DVR network setting, install the remote viewer to computer. Computer network IP also need to

setup on local IP address such as 192.168.192.6. DVR and computer IP address cannot equal. >PCÆDVR: need a cross-link cable.

WAN (World Area Network)

1)User apply static IP from network company, then input IP Gateway, and Subnet mask address to DVR TCP-UP setup.

2)Advice user apply network speed Upload 512K / Download 512K, to avoid image data too big influence the remote quality. The network traffic jam always make data transfer slow, it is normal.

3)After DVR TCP-IP setup, install the remote viewer to computer. See the network page.

37