Setting | Soundstream Technologies 300SX instruction

SETTING THE

HIGH PO WERlHiGH CURRENTS WlTCH

The High Power/High Current switch allows the REFERENCE amplifier to be one of two types of amps: either producing maximum power at higher impedances (perfect for satellites) or at lower impedances (usually with mukiple subwoofers). The circuit operates by selecting a sat of power supply voltage rails best suited to your particular application. One is a higher voltage “tap” optimized for high impedance applications while the other is lower voltage designed to provide more current. Unlike other amplifiers, Soundstream’s REFERENCE ampllfiers can be configured to drivevirtually any impedance and make maximum power!

COHERENTSTEREOTM/

MIXED-MONO /BRIDGED MONO

The REFERENCE amplifiers have the ability to operate in any one of the following modes:

ICoherent StereorM with identical lalt and right stereo channels for maximum fidelity. Best choice for satellite speakers. Use this mode unless Mixed-Mono is necessary.

Mixed-Monoin order to drive stereo and mono simultaneously: works well

for center channels. It can be used anytime you need a summed mono

Jchannel. Somewhat sacrifices sonic accuracy as additional circuitry is introduced to one channel. In hiked-Mono. the left channel Is Inveried, see diagmm below or on the bottom of the emplK?r.

Bridged MOnO for dedicated single channel operation; ideal far driving subwoofers. It is also used when large amounts of power are necessary for single speakers. In bridged mcno, only the r/ght channel Input Is actlve.

Hlgh Power

Wan6

Hlgh Current

Watts

REFERENCE300sx

5 0 x 2	100x2	150x2	n/a
(100x1)	(200x1)	(300 x 1)
2 5 x 2	5 0 x 2	100x2	150x2	COHERENT WERE0	BRIDQED	MONO
2 5 x 2	5 0 x 2	100x2	150x2	,L. .I.	.I..	-I.
(50x1)	(100x1)	(150x1)	(3OOXi)

OTHER COMMENTS:

If you blow fuses with the REFERENCE amplifiers, switch to the High Currant mode. If the problem persists. it is likafy that the amplifier is seeing a dead short, either in the speaker wire or in the speaker itself. RecWy the problem

before blowing muId&%? fuses!

!,	In bridged mono, on/y the right channel input is active.

NOTE: lfyou intend to drive a REFERENCE amp in Mono but have stereo outputs fmm your cmssover or source unit. you can put the swifch in Mixed-Mono buf follow lhs normal wiring for Bridged Mono.

300SX specifications

Soundstream Technologies has made a name for itself in the automotive audio industry, particularly with the introduction of the Soundstream Technologies 300SX. This amplifier stands out due to its remarkable combination of power, efficiency, and advanced features, making it an appealing choice for serious audiophiles looking to enhance their vehicle’s sound system.

The Soundstream 300SX is a Class D amplifier designed to deliver robust performance while maintaining compact dimensions. This efficiency allows it to produce high power output without overheating, making it suitable for various installation configurations in both cars and trucks. With a peak power output of 3000 watts, it provides substantial power to drive large speakers or subwoofers, ensuring that users experience high-quality sound across multiple frequencies.

One of the key features of the 300SX is its high-level inputs, allowing for easy integration into factory audio systems. This feature enables users to upgrade their sound without needing to replace the entire system, making it a cost-effective solution for those looking to elevate their audio experience. Additionally, it includes low-level inputs for those who prefer a direct connection to aftermarket head units.

The amplifier also boasts a variable crossover feature, which allows users to fine-tune their audio experience based on personal preferences or specific speaker requirements. This capability ensures that frequencies are correctly allocated to the appropriate speakers, enhancing clarity and overall sound quality. Furthermore, the inclusion of bass boost control further enables users to amplify low frequencies, making it ideal for bass enthusiasts.

Another significant aspect of the Soundstream 300SX is its durable build quality. Designed to withstand the rigors of automotive environments, the amplifier features a robust chassis that reduces the risk of damage from vibrations or extreme temperatures. Additionally, it comes equipped with built-in thermal and overload protection, ensuring longevity and reliability in performance.

In terms of aesthetics, the 300SX presents a sleek and modern appearance, often featuring an eye-catching design that can complement any vehicle's interior. Its compact size allows for flexible mounting options, making installation straightforward even in tight spaces.

In summary, the Soundstream Technologies 300SX amplifier represents a powerful choice for car audio enthusiasts. With its impressive power output, versatile connectivity options, customizable sound features, and solid construction, it delivers an exceptional audio experience that caters to various listening preferences.