Sony DK-AP8P operation manual Maintenance, Specifications, Cleaning the unit

DK-AP8P

References

Maintenance

■Cleaning the unit

Periodically wipe the unit with a clean soft cloth.

Caution:

●Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the unit finishing.

●Do not apply oil to the inside of the unit. It may cause malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

■ General

Power source	DC IN 6V		2A: AC/DC adaptor
	(AC 100 -	240	V ~ 50/60 Hz)
	DC IN 6V			[ “AA” size (UM/SUM-3,
	R6 or HP-7) battery x 4]
Power	7 W
consumption
Output power	Front speakers:
	1.2 watts minimum RMS per channel
	into 8 ohms from 100 Hz to 20 KHz, 10%
	total harmonic distortion.
	Subwoofer:
	2 watts minimum RMS into 4 ohms from
	50 Hz to 120 Hz, 10% total harmonic
	distortion.

Speaker	2.1-way type speaker system
	Front speaker: 1-1/8" (3.0 cm)
	Subwoofer: 1-3/4" (4.6 cm)
Speaker maximum	Front speaker: 2.0 W/Channel
input power	Subwoofer: 4 W
Speaker rated	Front speaker: 1.2 W/Channel
input power	Subwoofer: 2 W
Output terminals	Video output: 1Vp-p
Input terminals	Auxiliary (audio signal):
	250 mV/47 k ohms
Dimensions	Width: 7-4/5" (208 mm)
	Height: 2-7/10" (69.8 mm)
	Depth: 3" (83 mm)
Weight	1.58 lbs. (0.72 kg)

18