4Set up SDV6225T/27
For VHF reception
1 Extend the telescopic dipoles to the longest possible length.
Tip
•• It is possible to turn the gain control knob down for best reception.
For UHF reception
1 Turn the TV to the desired channel.
2 Turn on the amplifier by rotating the gain control knob towards the max position until reception is improved.
Tip
•• It is possible to turn the gain control knob down for best reception.
2 Turn the TV to the desired channel. Move the dipoles in different directions up and down until the reception is achieved.
0$;
9 | 7279 |
P$ |
|
3 Turn on the amplifier by rotating the gain control knob towards the max position until better reception is achieved.
Set up a digital tuner with this antenna
You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive viewable channels.
There are two ways to connect the antenna to the TV:
•Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .
•Connect the antenna directly to the TV.
Tune to the analogue channels and find the best antenna location. Then re- connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner.
8EN