Disc Operations, Playable Discs, Region Codes

IMPORTANT!

–Depending on the DVD or VIDEO CD, some operations may be different or restricted.

–Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction.

–If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.

Playable Discs

Your DVD Player will play:

–Digital Versatile Discs (DVDs)

–Video CDs (VCDs)

–Super Video CDs (SVCDs)

–Digital Versatile Discs + Recordable (DVD+R)

–Digital Versatile Discs + Rewritable (DVD+RW)

–Compact Discs (CDs)

–MP3 disc on CD-R(W):

–Supported sampling frequencies: 8 kHz~48 kHz

–Supported Bit-rates : 8~320 kbps, variable bitrates

–WMA-CDs (CD-ROMs with WMA tracks)

–Picture (JPEG) files on CD-R(W)

Region Codes

DVDs must be labeled as shown below in order to play on this DVD system.You cannot play discs that are labeled for other regions.

ALL	1

Note:

–If you are having trouble playing a certain disc, remove the disc and try a different one. Improper

formatted disc will not play on this DVD Player.

Disc Operations

Playing discs

1Connect the power cords of the system and TV (or any optional stereo or AV receiver) to a power outlet.

2Turn on the TV power and set to the correct Video In channel. (See “Setting up the TV”).

3Press ECO POWER/STANDBY-ONBon the DVD Player front panel or B on the remote.

➜ You should see the blue Philips DVD background screen on the TV.

4Press OPEN•CLOSE to open the disc tray and load in a disc, then press the same button again to close the disc tray.

➜ Make sure the label side is facing up.

5Playback will start automatically (depending on

the disc type).

➜If a disc menu appears on the TV, see “Using the Disc Menu”.

➜If the disc is locked by parental control, you must enter your four-digit password. (See “Password Setup Page”).

6At any time, simply press BAND/9 (or 9 on the remote) to stop playback.

Using the Disc Menu

Depending on the disc, a menu may appear on the TV screen once you load the disc.

To select a playback feature or item

●Use 1 2 3 4 and OK or Numeric Keypad (0-9)on the remote.

➜ Playback will start automatically.

To access or exit from the menu

●Press DISC MENU on the remote.

For VCD with Playback Control (PBC) feature (version 2.0 only)

PBC playback allows you to play Video CDs interactively, following the menu on the display.

English